Author Topic: Balsam Fir  (Read 2534 times)

0 Members and 1 Guest are viewing this topic.

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,869
  • Keep it flexible
    • Marc's Bows and Arrows
Balsam Fir
« on: February 17, 2018, 07:40:03 am »
I cut down a fairly large Aspen yesterday and was trying to drop it inside an opening in the surrounding trees, I failed.  It came down on top of a smallish diameter Balsam, about 6" in diameter, which broke it in half but also shattered it in a way I've never seen before.





At -15 C the temperature was cold but not that cold.  Balsam is not much of a firewood but I brought the pieces out because my wife wants to do something with them
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,483
Re: Balsam Fir
« Reply #1 on: February 17, 2018, 08:56:22 am »
Looks almost like a split out piece of bamboo. Did it follow one ring?
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Stoker

  • Member
  • Posts: 1,715
Re: Balsam Fir
« Reply #2 on: February 17, 2018, 02:25:40 pm »
Only seen pine or fir split like that at least -40c
Bacon is food DUCT tape - Cipriano

Offline upstatenybowyer

  • Member
  • Posts: 2,700
Re: Balsam Fir
« Reply #3 on: February 17, 2018, 07:42:03 pm »
that's really cool. Maybe you could make a serving tray out of it or some thing...  -C-
"Even as the archer loves the arrow that flies, so too he loves the bow that remains constant in his hands."

Nigerian Proverb

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,869
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Balsam Fir
« Reply #4 on: February 17, 2018, 08:36:52 pm »
The break followed the growth rings right down to the core on the one side of tree.  I brought back the larger pieces with the larger of those being about 4" across and some 10' long
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline willie

  • Member
  • Posts: 3,174
Re: Balsam Fir
« Reply #5 on: February 18, 2018, 12:04:36 am »
you can research it as "ring shake"
more common in hemlock

I got a few pieces back in the corner, saved up for something..... just don't know what

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Balsam Fir
« Reply #6 on: February 18, 2018, 08:38:09 am »
That is a unique type length of a split Marc.Not a whole lot of inner locking grain to that fir.The transporting firewood this time of year a bit easier on skis on the snow opposed to wheels on dry ground I'm sure.
That cold weather does funny things to woods' splitting charateristics.While coon hunting on very cold rather windy nights many times I would hear trees making popping type noises swaying in the wind.Things seem to get a bit more brittle.I split all my firewood by hand here and soon found out that wood splits a lot easier in temps -10 F or more.The colder the easier.Handy to know if your burning that tough old elm wood.
Think your right willie calling it a laminar ring shake type split.
« Last Edit: February 18, 2018, 08:58:19 am by BowEd »
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline penderbender

  • Member
  • Posts: 733
  • island life...
Re: Balsam Fir
« Reply #7 on: February 19, 2018, 07:55:39 pm »
I have seen western red cedar split like that from being felled on something, another felled tree, a rock, anything really. It is always cool to see though. Cheers- Brendan

Offline Del the cat

  • Member
  • Posts: 8,289
    • Derek Hutchison Native Wood Self Bows
Re: Balsam Fir
« Reply #8 on: February 20, 2018, 03:57:10 am »
It's a wonder it didn't splinter into perfect 5/16" shafts  ;D
Del
Health warning, these posts may contain traces of nut.

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,869
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Balsam Fir
« Reply #9 on: February 20, 2018, 08:35:24 am »
I've used Balsam Fir for arrows.  It splits very easily and usually grows with no twist.  It's very light though and shafts have to be a bit thick for proper spine and weight
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com