Author Topic: 2018 Bow Trade-Completed  (Read 95464 times)

0 Members and 1 Guest are viewing this topic.

Offline burchett.donald

  • Member
  • Posts: 2,436
Re: 2018 Bow Trade-Sign Up
« Reply #240 on: May 05, 2018, 11:51:16 pm »
 Morgan,
               Is that a piece of Hickory? Go ahead and blend the tapers, it won't hurt it...Nice start...I like the character

                                                                                                                                                                          Don
Genesis 27:3 Now therefore take, I pray thee, thy weapons, thy quiver and thy bow, and go out to the field, and take me some venison;

Offline Morgan

  • Member
  • Posts: 1,028
Re: 2018 Bow Trade-Sign Up
« Reply #241 on: May 06, 2018, 01:35:37 am »
Morgan,
               Is that a piece of Hickory? Go ahead and blend the tapers, it won't hurt it...Nice start...I like the character

                                                                                                                                                                          Don
No sir, it is hackberry. I’ll try to bring that taper back some then, Thanks!

Offline hoosierf

  • Member
  • Posts: 492
Re: 2018 Bow Trade-Sign Up
« Reply #242 on: May 06, 2018, 05:56:35 am »
Looks good Morgan.  I often end up with that same taper at the tips and i know exactly what you mean.

I have my backup plan almost done.  Here she is at first brace. Red oak backed Osage. Never seen that one before but i like red oak backs. I get these really awesome quartersawn 3/16th 2 1/2” wide eight foot cabinet fillers at Fleet Farm. It’s drawing in the 65# range i would guess. I haven’t pulled it past 25” and that’s right at 55# and I’m shooting for 55# at 28”. No set so far. The Osage is an old timber found in a barn.

I’ll get some more photos.


Offline Morgan

  • Member
  • Posts: 1,028
Re: 2018 Bow Trade-Sign Up
« Reply #243 on: May 06, 2018, 09:17:18 am »
Nice Hoosier!

Offline DuBois

  • Member
  • Posts: 2,020
Re: 2018 Bow Trade-Sign Up
« Reply #244 on: May 06, 2018, 09:55:13 am »
Looks like I've been missing out here and things are really picking up. Great starts so far.

Offline hoosierf

  • Member
  • Posts: 492
Re: 2018 Bow Trade-Sign Up
« Reply #245 on: May 06, 2018, 06:58:21 pm »
72” ntn 73” overall. 61.5# @ 28.5”. Red oak backed Osage. Might drop the 5 or 6#. It want to shoot it more first. 100 shots so far.  Unbraced pic is immediately after unstringing.

Offline jeffp51

  • Member
  • Posts: 1,640
Re: 2018 Bow Trade-Sign Up
« Reply #246 on: May 06, 2018, 07:58:33 pm »
looks like that right limb is stiffer by a good bit than the left.  might need a few scrapes more on that side.  but stay away from that fade.  it looks like it is doing most of the bending.

Offline JWMALONE

  • Member
  • Posts: 450
Re: 2018 Bow Trade-Sign Up
« Reply #247 on: May 07, 2018, 06:03:25 am »
Looking good fellows. I will get some pics this evening. Having some problems staying connected on the internet, gotta call some one to check it out.
Red Oak its the gateway wood!

Offline hoosierf

  • Member
  • Posts: 492
Re: 2018 Bow Trade-Sign Up
« Reply #248 on: May 07, 2018, 07:33:46 am »
looks like that right limb is stiffer by a good bit than the left.  might need a few scrapes more on that side.  but stay away from that fade.  it looks like it is doing most of the bending.

Yep i see it. Middle 8” of the right/top limb and the tip needs just a fuzz.  You can see in person that the belly lam is probably 1/32 thicker there as well. Thank you.

Offline stickbowbeard

  • Member
  • Posts: 49
Re: 2018 Bow Trade-Sign Up
« Reply #249 on: May 07, 2018, 01:03:21 pm »
Hello All,

Found a little time to put a little work in.  It may not be looking too much like a bow yet, but I got the entire stave reduced to about 1 3/4" wide.  Final thickness should be closer to around 1 1/2" for this attempt at an eastern woodlands style bow.  This stave is thick enough, that I want to try and get another bow off the belly, which is why I reduced the entire stave to a constant thickness.  Now I will pay a visit to my friend to use his bandsaw to reduce the belly so that I can hopefully get at least a kids bow out of the belly.  Then it won't take much to get this to the tillering stage, hopefully this weekend.  I really like this stave.  It's got some nice curves in it to keep it interesting.

20180504_171234 by Eric Beard, on Flickr

I did spend a little time this weekend building up my stave stock as well.  Cut some mullberry off a friend's property and got 4 nice, strait staves and a few billets split and up in my shed seasoning.  Can't wait to put these to work next year.

20180505_121744 by Eric Beard, on Flickr

20180505_115228 by Eric Beard, on Flickr
« Last Edit: May 07, 2018, 01:08:50 pm by stickbowbeard »

Offline Morgan

  • Member
  • Posts: 1,028
Re: 2018 Bow Trade-Sign Up
« Reply #250 on: May 10, 2018, 08:01:57 pm »
Did a little more work today. Got it to low brace and bending. At the point I need to heat the belly, kinda nervous about it, one limb is getting ridiculously thin the last foot or so as is. Heating always makes it stiffer and that will increase the problem. May put some reflex into it.

Offline hoosierf

  • Member
  • Posts: 492
Re: 2018 Bow Trade-Sign Up
« Reply #251 on: May 10, 2018, 08:45:55 pm »
Morgan, I’m very curious about your scale setup there.

Offline M2A

  • Member
  • Posts: 878
Re: 2018 Bow Trade-Sign Up
« Reply #252 on: May 10, 2018, 08:55:24 pm »
Doing some nice work there guys!

Sorry I got way busy for the last week or 2. But I been plugging away at this osage stave every chance I get. Got the limbs bending some in the last 2 days. Its about 1 7/8 at the fades and narrows up to 1 3/4 before it tapers. With all the curves in it those are approximate numbers. Think I'm going try and even up the reflex this weekend so I can get to tillering next week. Tips and handle are oversized yet, string alignment should not be a problematic as that elm I was working on was.

I think with what I got to work with, I'm going to go with 3 inch fades. I always like the way the grain appears there and that should show it off real nice. Got some more good ideas for this one but need to get it bending well first.

IMG_1860 by Mike Allridge, on Flickr

IMG_1859 by Mike Allridge, on Flickr

IMG_1858 by Mike Allridge, on Flickr

     

Offline Morgan

  • Member
  • Posts: 1,028
Re: 2018 Bow Trade-Sign Up
« Reply #253 on: May 10, 2018, 11:04:31 pm »
Morgan, I’m very curious about your scale setup there.
It’s just a cheap Berkley fish scale hooked to the string.

Offline burchett.donald

  • Member
  • Posts: 2,436
Re: 2018 Bow Trade-Sign Up
« Reply #254 on: May 11, 2018, 06:38:48 am »
 Nice work hoosierf

 Morgan, I think the light and the slight limb twist in the picture is throwing me off on the thickness...Let that wood tell you where to scrape...Looks very even, nice start...

  M2A, nice looking character stave! great job so far...

    Looking good guys and enjoying your thread...
                                                                           Don
Genesis 27:3 Now therefore take, I pray thee, thy weapons, thy quiver and thy bow, and go out to the field, and take me some venison;