Author Topic: 2018 Bow Trade-Completed  (Read 95409 times)

0 Members and 1 Guest are viewing this topic.

Offline Swampman

  • Member
  • Posts: 1,037
  • Primitive Archer subscription number PM109299
Re: 2018 Bow Trade-Sign Up
« Reply #330 on: July 31, 2018, 07:57:53 am »
That handle looks great Mike.  Very nice work.

Offline High-Desert

  • Member
  • Posts: 874
Re: 2018 Bow Trade-Sign Up
« Reply #331 on: July 31, 2018, 10:04:10 am »
You guys are makin some good looking bows. I don't know what I was thinking in not doing it this year. This is so cool to see
Eric

Offline Mo_coon-catcher

  • Member
  • Posts: 1,311
Re: 2018 Bow Trade-Sign Up
« Reply #332 on: August 01, 2018, 02:16:08 pm »
The main profile was bend and mildly heat treated in this black locust. One hook on this dude is bent just now. Tomorrow I’ll get the other side vent. Steamed for the foil and heat gun method for about 30 min then used dry heat to help it walk around the curve. It did crack and split a bit at one point. But te tip is still about 1/2” thick, so it’ll come right out as I clean it up.  Hopefully itll shoot better than the first two.

Kyle

Offline burchett.donald

  • Member
  • Posts: 2,436
Re: 2018 Bow Trade-Sign Up
« Reply #333 on: August 02, 2018, 06:12:11 am »
   Looking good Kyle...Hope the other hook works out...
                                                                                        Don
                                                                             
                                                                                         
                                 
Genesis 27:3 Now therefore take, I pray thee, thy weapons, thy quiver and thy bow, and go out to the field, and take me some venison;

Offline Mo_coon-catcher

  • Member
  • Posts: 1,311
Re: 2018 Bow Trade-Sign Up
« Reply #334 on: August 02, 2018, 01:42:00 pm »
The first hook held and I’m working on ateaming the second while working on on my first cup of coffee.
Thanks don, I’m hoping this one goes well too. If not, it can easily become a short bendy handle. So I won’t cry too much

Kyle

Offline Mo_coon-catcher

  • Member
  • Posts: 1,311
Re: 2018 Bow Trade-Sign Up
« Reply #335 on: August 02, 2018, 01:44:52 pm »
Well, I guess it’ll be tonight when I can finish the other hook. While heating this one, the heat gun just made a loud pop, with a nice big spark and quit. SO now I’ve gotta pick up a new one when I go to town later.

Kyle

Offline tattoo dave

  • Member
  • Posts: 1,540
  • Rockford, MI
Re: 2018 Bow Trade-Sign Up
« Reply #336 on: August 03, 2018, 03:36:30 pm »
My heat gun did the same thing last time I used it. So how long do you heat up a piece that thick? I usually do steam. Can't say I've tried the dry heat method.

Tattoo Dave.
Rockford, MI

Offline Mo_coon-catcher

  • Member
  • Posts: 1,311
Re: 2018 Bow Trade-Sign Up
« Reply #337 on: August 03, 2018, 07:53:48 pm »
Those tips are about 1/2” thick. Maybe a bit more. But under the foil is a wet paper towel that will boil and steam when hit with the heat gun. I let it steam that way for about 30 minutes before I clamped thenstave to the form. I follow up with the heat gun to keep the wood hot to it’ll easily flow around the form. I oil the wood with olive or vegetable oil so it won’t soak up the water before the water gets hot. I’ve had a few check bad on me Because of water absorbsion.
I got the other side bent last night.  It went more smoothly than the first. The first hook had worse grain atructure for sharp bends so I did it first Incase it broke or didn’t want to bend. But they both went well enough to use.

Kyle

Offline M2A

  • Member
  • Posts: 878
Re: 2018 Bow Trade-Sign Up
« Reply #338 on: August 07, 2018, 09:43:56 pm »
Looking forward to seeing how thing turn out Kyle. I have yet to try recurving tips. Although I may have a stave with a ring chased that I may give it a go. Good luck on the build! :) mike




Offline hoosierf

  • Member
  • Posts: 492
Re: 2018 Bow Trade-Sign Up
« Reply #339 on: August 11, 2018, 08:35:21 am »
And finally the photos. Still have to sign it get final draw weight although i know it’s in the mid upper 50’s maybe even 60.  Anyway she’s ready go to her new home.

Offline hoosierf

  • Member
  • Posts: 492
Re: 2018 Bow Trade-Sign Up
« Reply #340 on: August 11, 2018, 08:37:25 am »
Few more. I may have compressed them too much. We’ll see what y’all think.

Offline burchett.donald

  • Member
  • Posts: 2,436
Re: 2018 Bow Trade-Sign Up
« Reply #341 on: August 11, 2018, 12:18:49 pm »
 hoosierf,
               Got to love that even bend man...Like them skins
                                                                                              Don
Genesis 27:3 Now therefore take, I pray thee, thy weapons, thy quiver and thy bow, and go out to the field, and take me some venison;

Offline Morgan

  • Member
  • Posts: 1,028
Re: 2018 Bow Trade-Sign Up
« Reply #342 on: August 11, 2018, 12:39:33 pm »
Very nice Hoosier!

Offline hoosierf

  • Member
  • Posts: 492
Re: 2018 Bow Trade-Sign Up
« Reply #343 on: August 11, 2018, 02:08:16 pm »
I’ll fix those pics tonight. The resolution is way too low.  At least on my phone it is.

Offline penderbender

  • Member
  • Posts: 733
  • island life...
Re: 2018 Bow Trade-Sign Up
« Reply #344 on: August 11, 2018, 11:27:48 pm »
Nice looking bow Hoosier! I fitted/epoxied on horn nocks on my victims bow today. It's pulling about 80 pounds right now. I will get some pics up tomorrow after I shape them some. Cheers- Brendan