« previous next »
Pages: [1]

Author Topic: String Jig with Nails?  (Read 1033 times)

0 Members and 1 Guest are viewing this topic.

Offline Composite

  • Member
  • Posts: 1
String Jig with Nails?
« on: April 18, 2018, 11:16:01 am »
Hi everyone.  Hopefully someone can point me to a link.  I used to have a string making jig which was very simple, just a bunch of nails in a board, but it's been ages since i did any bowmaking and i forgot the dimensions.  Anybody know the one i mean?

Thanks!
Logged

Offline Stick Bender

  • Member
  • Posts: 2,003
Re: String Jig with Nails?
« Reply #1 on: April 18, 2018, 11:22:06 am »
I just made a simple endless loop string jig with nails I put the centers on 8 in. It actualy worked well !
Logged
If you fear failure you will never Try !

Offline Stick Bender

  • Member
  • Posts: 2,003
Re: String Jig with Nails?
« Reply #2 on: April 18, 2018, 11:28:08 am »
Flemish strings I do with out a jig !
Logged
If you fear failure you will never Try !

Offline osage outlaw

  • Member
  • Posts: 11,952
Re: String Jig with Nails?
« Reply #3 on: April 18, 2018, 12:49:05 pm »
Logged
I started out with nothin' and I still got most of it left

Offline osage outlaw

  • Member
  • Posts: 11,952
Re: String Jig with Nails?
« Reply #4 on: April 18, 2018, 02:29:31 pm »
I used to measure and cut the strands by hand.  It worked fine.  Once I got one of these string boards I found it is much easier and saves a lot of time. 
Logged
I started out with nothin' and I still got most of it left

Offline stuckinthemud

  • Member
  • Posts: 2,299
    • avenue woodcarving
Re: String Jig with Nails?
« Reply #5 on: April 18, 2018, 02:51:11 pm »
+1, I also used to lay out the strands by hand but that jig is really quick to make and to use
Logged
Pages: [1]
« previous next »