Author Topic: Is anyone else into carving spoons?  (Read 5723 times)

0 Members and 1 Guest are viewing this topic.

Offline Julian

  • Member
  • Posts: 215
Is anyone else into carving spoons?
« on: May 22, 2018, 05:52:47 am »
I've been teaching myself to carve spoons in between making bows - thought I'd share some and I'd love to see any efforts by you guys.

I recently cut some nicely spalted poplar down by the river - here's my latest spoon, still a WIP, but taking shape.


Offline High-Desert

  • Member
  • Posts: 874
Re: Is anyone else into carving spoons?
« Reply #1 on: May 22, 2018, 08:07:37 am »
For sure, they are fun, quick carving projects that you can go out to a tree and cut off a limb and be carving in minutes. That's good looking spoon you have started there. Make sure to post  again when you are all finished up.
Eric

Offline GlisGlis

  • Member
  • Posts: 1,477
Re: Is anyone else into carving spoons?
« Reply #2 on: May 22, 2018, 08:50:43 am »
ohh man I like alot that handle. is that the bark on the handle or some kind of heat threatment?

I like spoon carving and always make some every summer while in holidays.
Here just some speedy ones made recently with a knife and a small gouge I always carry while outdoor

Offline Julian

  • Member
  • Posts: 215
Re: Is anyone else into carving spoons?
« Reply #3 on: May 22, 2018, 09:59:28 am »
that's the bark, yeah.

Offline stuckinthemud

  • Member
  • Posts: 2,299
    • avenue woodcarving
Re: Is anyone else into carving spoons?
« Reply #4 on: May 22, 2018, 10:21:33 am »
Nice work guys, I always use  a sow-back or a short-bend gouge for my spoon bowls, makes life a huge amount easier. For whittling with a gouge,  you hold the gouge like a pen, keep the tips of both your thumbs touching and kind of rock the work and spoon up and down and back and forth. It sounds more complex than it really is. The thumbs together triangulates everything and stops you pushing the gouge through your hand

Offline Hawkdancer

  • Member
  • Posts: 5,027
Re: Is anyone else into carving spoons?
« Reply #5 on: May 22, 2018, 01:39:24 pm »
Got 2 WIP one walnut and one cherry that will progress sooner or later.  Did a couple in cherry, cherry, gave one to my sister in law, kept one!  Lots of fun.  You can wrap your fresh wood in plastic wrap and throw it into the freezer to use later (S)!
Hawkdancer
Life is far too serious to be taken that way!
Jerry

Offline Julian

  • Member
  • Posts: 215
Re: Is anyone else into carving spoons?
« Reply #6 on: May 23, 2018, 12:33:32 am »
Got 2 WIP one walnut and one cherry that will progress sooner or later.  Did a couple in cherry, cherry, gave one to my sister in law, kept one!  Lots of fun.  You can wrap your fresh wood in plastic wrap and throw it into the freezer to use later (S)!
Hawkdancer

I have some spoons in the freezer waiting to be finished right now, actually :P

Here's how the one I posted earlier turned out:
https://imgur.com/a/7erVTCx

and another one I made for my mum:

Offline GlisGlis

  • Member
  • Posts: 1,477
Re: Is anyone else into carving spoons?
« Reply #7 on: May 23, 2018, 01:23:47 am »
why you put it in the freezer?

Offline Julian

  • Member
  • Posts: 215
Re: Is anyone else into carving spoons?
« Reply #8 on: May 23, 2018, 01:53:30 am »
why you put it in the freezer?


Spoons are best carved while the wood is fresh cut and wet. If you freeze it, it locks the moisture content in so you can work on it later without it drying out.

Offline GlisGlis

  • Member
  • Posts: 1,477
Re: Is anyone else into carving spoons?
« Reply #9 on: May 23, 2018, 05:32:40 am »
that's something I have to try. thankyou for the explanation

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,884
  • Eddie Parker
Re: Is anyone else into carving spoons?
« Reply #10 on: May 23, 2018, 06:29:32 am »
I like making them, also. Lately I just haven't had time to finish up some I've got started. It's nice to take a break from bow making and knapping.
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline High-Desert

  • Member
  • Posts: 874
Re: Is anyone else into carving spoons?
« Reply #11 on: May 23, 2018, 08:49:13 am »
Freezer?!?! Thanks for that idea....my wife's going to love the stack of sticks next to the hides in the freezer.
Eric

Offline Julian

  • Member
  • Posts: 215
Re: Is anyone else into carving spoons?
« Reply #12 on: May 23, 2018, 10:06:30 am »
I like making them, also. Lately I just haven't had time to finish up some I've got started. It's nice to take a break from bow making and knapping.

Sure is nice to have a couple hobbies to juggle. I like spoons because I can start and finish several of them in a good session. I'm learning to Kolrose now, and I'm wondering if I could even decorate a bow that way.

Offline Julian

  • Member
  • Posts: 215
Re: Is anyone else into carving spoons?
« Reply #13 on: May 23, 2018, 10:07:07 am »
Here's some more I worked on today:


Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,884
  • Eddie Parker
Re: Is anyone else into carving spoons?
« Reply #14 on: May 23, 2018, 07:58:08 pm »
Those are cool. I'm playing with carving them and turning on my lathe.
Lakeland, Florida
 If you have to pull the trigger, is it really archery?