« previous next »
Pages: [1]

Author Topic: Question about wrapping w/ inner tubes  (Read 1221 times)

0 Members and 1 Guest are viewing this topic.

Offline upstatenybowyer

  • Member
  • Posts: 2,700
Question about wrapping w/ inner tubes
« on: June 23, 2018, 02:41:27 pm »
The question is, if I am using Smooth On to back a bow w/ bamboo and I wrap everything w/ plastic wrap (to prevent epoxy getting all over tubes) and then w/ inner tubes, does this effect cure time as no air can get in to allow everything to dry?

Logged
"Even as the archer loves the arrow that flies, so too he loves the bow that remains constant in his hands."

Nigerian Proverb

Offline DC

  • Member
  • Posts: 10,396
Re: Question about wrapping w/ inner tubes
« Reply #1 on: June 23, 2018, 03:04:42 pm »
Nope, epoxy is a closed chemical reaction, everything it needs is in there.
Oh, put a layer of masking tape on the Boo back. Save trying to get the epoxy of that too.
Logged

Offline Badger

  • Member
  • Posts: 8,118
Re: Question about wrapping w/ inner tubes
« Reply #2 on: June 23, 2018, 03:46:16 pm »
  I put masking tape on back and belly but back for sure. Using tightbond it would affect the cure time but not with any kind of epoxy.
Logged

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Question about wrapping w/ inner tubes
« Reply #3 on: June 23, 2018, 05:01:06 pm »
Exactly what those guys said.In fact on hot sunny days I've put the wrapped black inner tube future bow in the sun.The chemical reaction of the epoxy and the suns' warmth will bring the temps well above 150 degrees F.Never seen it go past 160 F though.I don't leave it more than 5 hours.It'll be cured then too.
I bring it inside then and let it cool off for a couple of hours before unwrapping and start cleaning it up.
Logged
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline upstatenybowyer

  • Member
  • Posts: 2,700
Re: Question about wrapping w/ inner tubes
« Reply #4 on: June 23, 2018, 05:05:24 pm »
Wow, this is a really huge help. Thanks guys.
Logged
"Even as the archer loves the arrow that flies, so too he loves the bow that remains constant in his hands."

Nigerian Proverb

Offline bubby

  • Member
  • Posts: 11,054
Re: Question about wrapping w/ inner tubes
« Reply #5 on: June 23, 2018, 06:13:16 pm »
All true , I put mine in the cab of my truck and this time of the year, 108 yesterday it gets plenty hot in the cab
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline PatM

  • Member
  • Posts: 6,737
Re: Question about wrapping w/ inner tubes
« Reply #6 on: June 23, 2018, 08:39:19 pm »
As noted, epoxy doesn't dry at all.    Even though it is runny it is still considered "100% solids".
Logged
Pages: [1]
« previous next »