Author Topic: New to the Boards... Guess I'll Start Here  (Read 6539 times)

0 Members and 1 Guest are viewing this topic.

Offline Rick Marchand

  • Member
  • Posts: 6
New to the Boards... Guess I'll Start Here
« on: September 14, 2018, 07:17:05 am »
Hey Folks,
I'm a long time primitive archery enthusiast. I own a Shrew Bow by Ron LeClair and shoot handmade primitive arrows. I look forward to participating on the forums, become a better archer and perhaps try my hand at making my own bow... my skills are meager in that respect.

I do have a skill set that fits this subforum, though. Which is why I chose to post here(with my peeps) prior to stumbling my way through the main focus of these boards.

Thanks.
Rick

Here are some past projects...







Offline Stoker

  • Member
  • Posts: 1,713
Re: New to the Boards... Guess I'll Start Here
« Reply #1 on: September 14, 2018, 08:02:48 am »
Welcome aboard Rick. If you want to make a bow the fella's here can help you out for sure a lot of talent here. Your knives look great.
Thanks Leroy
Bacon is food DUCT tape - Cipriano

Offline Rick Marchand

  • Member
  • Posts: 6
Re: New to the Boards... Guess I'll Start Here
« Reply #2 on: September 14, 2018, 08:11:42 am »
The more I look, the more I like. There are folks with great talent, who seem to be willing to share. What more could I ask for? I just wish I could contribute as well. Maybe here, in "at the forge". Every little bit helps, I guess.

Offline KHalverson

  • Member
  • Posts: 755
Re: New to the Boards... Guess I'll Start Here
« Reply #3 on: September 14, 2018, 09:37:22 am »
First off.
Welcome.
Good folks here.
Your work is very impressive.
Kevin

Offline Mesophilic

  • Member
  • Posts: 876
Re: New to the Boards... Guess I'll Start Here
« Reply #4 on: September 14, 2018, 09:45:05 am »
Great work and awesome pics!  Can you give us knife nuts some specs?  What cordage do you wrap with and do you impregnate with resin?
Trying is the first step to failure
-Homer Simpson-

Offline Rick Marchand

  • Member
  • Posts: 6
Re: New to the Boards... Guess I'll Start Here
« Reply #5 on: September 14, 2018, 10:20:21 am »
Thanks for the welcome... and yes, I'll share anything you'd like to know.

I use natural, hand-dyed hemp cord that is soaked in marine grade epoxy. Traditionally, it would have been sealed in lacquer or shellac. Modern epoxy is just one of those things you adopt because it works and doesn't ruin the look.

The backing material is either thick leather or wood, contoured and stained. Any bone or antler material is filled with thinned out epoxy to seal and strengthen pithy cores and whatnot.

These are all users... though, it would be safe to say the "pretty" ones don't see much use... breaks my heart.     

Offline Hawkdancer

  • Member
  • Posts: 5,027
Re: New to the Boards... Guess I'll Start Here
« Reply #6 on: September 14, 2018, 10:45:32 am »
Welcome aboard, Ric!  Very nice knives!  These guys will be very helpful in all aspects of primitive skills, and will tap yours as well.
Hawkdancer
Life is far too serious to be taken that way!
Jerry

Offline Trapper Rob

  • Member
  • Posts: 3,718
Re: New to the Boards... Guess I'll Start Here
« Reply #7 on: September 14, 2018, 07:56:04 pm »
You do amazing work.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,460
Re: New to the Boards... Guess I'll Start Here
« Reply #8 on: September 14, 2018, 08:34:49 pm »
Beautiful work, Rick. Welcome to PA.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline JW_Halverson

  • Member
  • Posts: 11,823
Re: New to the Boards... Guess I'll Start Here
« Reply #9 on: September 15, 2018, 10:48:55 am »
OK, now that you have established your bona fides in spades...WELCOME!
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Stoner

  • Member
  • Posts: 356
Re: New to the Boards... Guess I'll Start Here
« Reply #10 on: September 17, 2018, 03:20:21 am »
Welcome & WOW, Great Craftsmanship. John

Offline Ryan Jacob

  • Member
  • Posts: 427
Re: New to the Boards... Guess I'll Start Here
« Reply #11 on: September 17, 2018, 05:34:25 am »
These are all users... though, it would be safe to say the "pretty" ones don't see much use... breaks my heart.   

They’re all pretty though ???

Offline Bryce

  • Global Moderator
  • Member
  • Posts: 3,125
  • Pacific Ghost Longbows
Re: New to the Boards... Guess I'll Start Here
« Reply #12 on: October 07, 2018, 09:59:23 pm »
Very well done. How long is the Tanto?
Clatskanie, Oregon

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 31,711
  • if you have to ask you wouldn't understand ,Tenn.
Re: New to the Boards... Guess I'll Start Here
« Reply #13 on: October 18, 2018, 05:11:49 am »
Welcome to PA, that is some beautiful work you are doing. :)
 Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Rick Marchand

  • Member
  • Posts: 6
Re: New to the Boards... Guess I'll Start Here
« Reply #14 on: October 18, 2018, 09:54:26 am »
Very well done. How long is the Tanto?
It is more of a wakizashi length. 24" overall, 17" blade