Author Topic: Corner Tang Knife  (Read 4363 times)

0 Members and 1 Guest are viewing this topic.

Offline RickB

  • Member
  • Posts: 292
Corner Tang Knife
« on: October 08, 2018, 04:12:58 pm »
I made a mahogany obsidian knife preform last year. I finished up notching and sharpening it this past weekend and here's a couple photos. Rick B








« Last Edit: November 22, 2019, 04:39:21 pm by RickB »

Offline bjrogg

  • Member
  • Posts: 10,732
  • Cedar Pond
Re: Corner Tang Knife
« Reply #1 on: October 08, 2018, 07:07:22 pm »
Very nice Rick
Bjrogg
A hot cup of coffee and a beautiful sunrise

Offline Trapper Rob

  • Member
  • Posts: 3,718
Re: Corner Tang Knife
« Reply #2 on: October 08, 2018, 08:03:54 pm »
Nice blade.

Offline Hawkdancer

  • Member
  • Posts: 5,027
Re: Corner Tang Knife
« Reply #3 on: October 08, 2018, 11:16:35 pm »
Nice!  What style hafting will you put on it?
Hawkdancer
Life is far too serious to be taken that way!
Jerry

Offline Zuma

  • Member
  • Posts: 4,324
Re: Corner Tang Knife
« Reply #4 on: October 09, 2018, 06:07:19 am »
That's a dandy Rick. :) :KN )P(
zuma
If you are a good detective the past is at your feet. The future belongs to Faith.

Offline RickB

  • Member
  • Posts: 292
Re: Corner Tang Knife
« Reply #5 on: October 09, 2018, 10:56:29 am »
Nice!  What style hafting will you put on it?
Hawkdancer

Thanks for the comments. Right now I'm not planning on hafting it. If I did, I would use a fairly short wooden handle at about a 45 degree angle, sinew and pitch. Rick B

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,884
  • Eddie Parker
Re: Corner Tang Knife
« Reply #6 on: October 11, 2018, 08:15:08 am »
Very nice.
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline ohma2

  • Member
  • Posts: 960
Re: Corner Tang Knife
« Reply #7 on: October 12, 2018, 09:18:23 am »
Man thats some nice color in that piece

Offline Zuma

  • Member
  • Posts: 4,324
Re: Corner Tang Knife
« Reply #8 on: October 12, 2018, 11:09:51 am »
From my research on corner tang knives FWIW.
A leather or cordage wrist strap is used. This would allow the hand
to be free but give easy access to the blade as opposed to laying
the knife down. :o ??? :) Makes sense to me as the tang wouldn't
provide much support for hafting.
Zuma
If you are a good detective the past is at your feet. The future belongs to Faith.

Offline Ryan Jacob

  • Member
  • Posts: 427
Re: Corner Tang Knife
« Reply #9 on: October 13, 2018, 07:07:05 am »
Zuma
How would you tie it on?

Offline nclonghunter

  • Member
  • Posts: 1,779
Re: Corner Tang Knife
« Reply #10 on: October 13, 2018, 05:08:38 pm »
Good one!
There are no bad knappers, only bad flakes

Offline RickB

  • Member
  • Posts: 292
Re: Corner Tang Knife
« Reply #11 on: October 13, 2018, 07:42:21 pm »
From my research on corner tang knives FWIW.
A leather or cordage wrist strap is used. This would allow the hand
to be free but give easy access to the blade as opposed to laying
the knife down. :o ??? :) Makes sense to me as the tang wouldn't
provide much support for hafting.
Zuma

Zuma, I've always thought that they were tethered but have also seen archaeological suggestions like in the photo below. Rick B




Offline Zuma

  • Member
  • Posts: 4,324
Re: Corner Tang Knife
« Reply #12 on: October 14, 2018, 05:42:06 pm »
Rick who knows for sure? :o
But if you look at the neat drawings I think physic is on my side. )P(
Again FWIW.
Besides your blade is so sweet a fancy wrist strap would show more of it O:)
Zuma
If you are a good detective the past is at your feet. The future belongs to Faith.

Offline Zuma

  • Member
  • Posts: 4,324
Re: Corner Tang Knife
« Reply #13 on: October 14, 2018, 05:44:29 pm »
Zuma
How would you tie it on?
Just tie off around the tang. There would be no leverage or force against it.
If you are a good detective the past is at your feet. The future belongs to Faith.