« previous next »
Pages: [1] 2

Author Topic: Persimmon bendy handle molle  (Read 3022 times)

0 Members and 1 Guest are viewing this topic.

Offline Mo_coon-catcher

  • Member
  • Posts: 1,311
Persimmon bendy handle molle
« on: October 18, 2018, 07:36:59 am »
Here’s a little teaser of a persimmon bendy handles molle I just finished this morning. I’ll do a full update nice I have time to take more pictures either this evening, I just couldn’t not show this one a little. But it is 45# at 27” and took about 1.5” set.

Kyle
Logged

Offline ohma2

  • Member
  • Posts: 960
Re: Persimmon bendy handle molle
« Reply #1 on: October 18, 2018, 07:58:00 am »
Looking forward to the rest.few years ago i cut some persimmon and man it sure likes to twist.got a couple bows out of it though.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,494
Re: Persimmon bendy handle molle
« Reply #2 on: October 18, 2018, 08:30:38 am »
Looking forward to braced and full draw. You sure got some levers on that baby.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline leonwood

  • Member
  • Posts: 762
    • Leonwood Bows
Re: Persimmon bendy handle molle
« Reply #3 on: October 18, 2018, 12:53:21 pm »
That’s a teaser for sure! Looks like a rocker launcher with those narrow levers. Great to see you do those the right way!
Logged

Offline upstatenybowyer

  • Member
  • Posts: 2,700
Re: Persimmon bendy handle molle
« Reply #4 on: October 18, 2018, 07:16:53 pm »
 (-P
Logged
"Even as the archer loves the arrow that flies, so too he loves the bow that remains constant in his hands."

Nigerian Proverb

Offline burchett.donald

  • Member
  • Posts: 2,436
Re: Persimmon bendy handle molle
« Reply #5 on: October 18, 2018, 07:31:22 pm »
  I like all that character Kyle...Should make for an interesting tiller...
                                                                                                       Don
Logged
Genesis 27:3 Now therefore take, I pray thee, thy weapons, thy quiver and thy bow, and go out to the field, and take me some venison;

Offline Mo_coon-catcher

  • Member
  • Posts: 1,311
Re: Persimmon bendy handle molle
« Reply #6 on: October 19, 2018, 06:03:04 pm »
Here’s some better pictures and info.
She’s heat treated persimmon that draws 45# at 27”. 61” nock to nock, 4” handle section, lower limb is 14” to the lever fade, upper limb is 15” from handle to lever fade. Lower lever is 12.5” from fade to nock, the upper is just shy of 13”, and the lever fades are about 1.5” each. The limbs are 1.5” wide from handle to fade levers with the handle about 3/16” narrower. The levers go from 3/4” wide at the fade to 3/8” at the nocks. The depth is 3/4” at the fade to 3/8” at the nock. It weighs about 17.5 ounce with te leather and string.  I haven’t chronographed it but it’s very soft when shot but throws an arrow hard. It’s finished with linseed oil followed by about 8 coats of truoil with the India ink put on after the first coat of truoil.

Thanks for looking,
Kyle
Logged

Offline Mo_coon-catcher

  • Member
  • Posts: 1,311
Re: Persimmon bendy handle molle
« Reply #7 on: October 19, 2018, 06:04:07 pm »
Some more
Logged

Offline Mo_coon-catcher

  • Member
  • Posts: 1,311
Re: Persimmon bendy handle molle
« Reply #8 on: October 19, 2018, 06:04:48 pm »
The last few
Logged

Offline Hawkdancer

  • Member
  • Posts: 5,027
Re: Persimmon bendy handle molle
« Reply #9 on: October 19, 2018, 10:02:11 pm »
Nice!  Ought to be a fast shooter!
Hawkdancer
Logged
Life is far too serious to be taken that way!
Jerry

Offline PaulN/KS

  • Member
  • Posts: 1,381
Re: Persimmon bendy handle molle
« Reply #10 on: October 20, 2018, 05:19:30 am »
Looking Good Kyle.  :OK
Logged

Offline half eye

  • Member
  • Posts: 3,300
Re: Persimmon bendy handle molle
« Reply #11 on: October 20, 2018, 06:12:04 am »
Very nicely done sir. I especially like the fact that you tillered your working limbs to bend circular (from fade to fade) instead of more bend at the grip. I know those shoot really well.
rich
Logged

Offline Bayou Ben

  • Member
  • Posts: 661
Re: Persimmon bendy handle molle
« Reply #12 on: October 20, 2018, 07:44:22 am »
Not much room for error on that bow.  Nice job Kyle!
Logged

Offline Bob Barnes

  • Member
  • Posts: 929
Re: Persimmon bendy handle molle
« Reply #13 on: October 20, 2018, 08:38:43 am »
another beauty Kyle!
Logged
Seems like common sense isn't very common any more...

Offline backtowood B2W

  • Member
  • Posts: 574
Re: Persimmon bendy handle molle
« Reply #14 on: October 20, 2018, 02:18:06 pm »
Cool bow! Didn't know you can make bows from this wood. I only get hands on the fruits :NN
I defenitly will try out this design, thanks for showing!
Martin
Logged
Pages: [1] 2
« previous next »