Author Topic: Making a gas forge  (Read 21399 times)

0 Members and 1 Guest are viewing this topic.

Offline Hawkdancer

  • Member
  • Posts: 5,027
Re: Making a gas forge
« Reply #45 on: January 24, 2019, 10:42:21 pm »
That is some serious fire! (f). No problem heating up a cup of coffee!  Got an ultra high heat thermometer!  Nice job!
Hawkdancer
Life is far too serious to be taken that way!
Jerry

Offline osage outlaw

  • Member
  • Posts: 11,951
Re: Making a gas forge
« Reply #46 on: January 25, 2019, 03:35:35 pm »
I turned the pressure down on the regulator and did some tuning on the air plates.  I think this looks better.




Didn't take too long to get this chunk of steel glowing

I started out with nothin' and I still got most of it left

Online bjrogg

  • Member
  • Posts: 10,732
  • Cedar Pond
Re: Making a gas forge
« Reply #47 on: January 25, 2019, 04:55:34 pm »
Looking forward to seeing all the many projects that come out of that forge. I'm gonna bring you some scrap steel to Marshall Clint. I want to see you turn plow shares into swords.
Bjrogg
A hot cup of coffee and a beautiful sunrise

Offline KHalverson

  • Member
  • Posts: 755
Re: Making a gas forge
« Reply #48 on: January 25, 2019, 05:17:55 pm »
that looks like its working real good.

cant wait to see what ya forge up 1st.

Offline osage outlaw

  • Member
  • Posts: 11,951
Re: Making a gas forge
« Reply #49 on: January 26, 2019, 10:33:22 am »
Looking forward to seeing all the many projects that come out of that forge. I'm gonna bring you some scrap steel to Marshall Clint. I want to see you turn plow shares into swords.
Bjrogg

Sounds good BJ.  I'm not sure what a plow share is but I'll see what I can do with one. 
I started out with nothin' and I still got most of it left

Offline osage outlaw

  • Member
  • Posts: 11,951
Re: Making a gas forge
« Reply #50 on: January 26, 2019, 10:34:29 am »
that looks like its working real good.

cant wait to see what ya forge up 1st.


I'll do some practicing with it first.  For my first project I want to make a knife for an upcoming elk hunt. 
I started out with nothin' and I still got most of it left

Offline KHalverson

  • Member
  • Posts: 755
Re: Making a gas forge
« Reply #51 on: January 26, 2019, 11:25:50 am »
that looks like its working real good.

cant wait to see what ya forge up 1st.


I'll do some practicing with it first.  For my first project I want to make a knife for an upcoming elk hunt.


time to learn about critical anneal.

stress relieving.

and thermo cycling to reduce grain structure.


1 of the most important things to remember while working with high carbon steel is to strike while the iron is hot.



Offline osage outlaw

  • Member
  • Posts: 11,951
Re: Making a gas forge
« Reply #52 on: January 26, 2019, 11:47:51 am »
I have been annealing and thermo cycling the stock removal knives I've made so far.    I still need to cut a base for my anvil and move it to my garage.  I want to get that done as soon as the weather improves.
I started out with nothin' and I still got most of it left

Offline Hawkdancer

  • Member
  • Posts: 5,027
Re: Making a gas forge
« Reply #53 on: January 26, 2019, 10:23:50 pm »
Say, What!  -10f and a -40 wind chill is mild!  If you're crazy as a loon (S) >:D!  I've been uncomfortable in  the garage at +60F!  I know what you mean!
Hawkdancer
Life is far too serious to be taken that way!
Jerry

Offline Hawkdancer

  • Member
  • Posts: 5,027
Re: Making a gas forge
« Reply #54 on: January 26, 2019, 10:36:55 pm »
Do we get to see the puppy at MoJam?  I can bring a file and some spring steel, also got a froe  to straighten! (f) >:D
Hawkdancer
Life is far too serious to be taken that way!
Jerry

Offline osage outlaw

  • Member
  • Posts: 11,951
Re: Making a gas forge
« Reply #55 on: February 04, 2019, 06:46:44 pm »
It's too big and heavy to haul to Mojam.  I have leftover supplies.  I might make a smaller travel size forge if I find the right size shell.


I finally finished the last step.  It's officially done now.  I added the IR reflective coating to the inside.  This stuff is called Metrikote.  It's supposed to reflect the heat back into the forge.  It allows the forge to heat up faster and saves gas.   




I also coated the brick I made for the bottom of the forge.




I was going to cut a base for my anvil today but the rain cancelled those plans.  I cut up a few small burls today for knife scales.  This one was from a mystery tree root.  It has some amazing grain and color.  I am going to send it off to be stabilized before using it. 

I started out with nothin' and I still got most of it left

Offline Hawkdancer

  • Member
  • Posts: 5,027
Re: Making a gas forge
« Reply #56 on: February 04, 2019, 11:06:08 pm »
Looking at the finished product, I see why you used a 20# bottle!  A 30# would need 2 men and a boy, and a winch to move!  Looks like it gets the steel plenty hot in a reasonable time!
Hawkdancer
Life is far too serious to be taken that way!
Jerry

Online bjrogg

  • Member
  • Posts: 10,732
  • Cedar Pond
Re: Making a gas forge
« Reply #57 on: February 06, 2019, 04:52:53 am »
Forge looks great Clint. So do those burls. I think some really nice stuff is going to come from them both in the future. I'll be watching. (-P
Bjrogg
A hot cup of coffee and a beautiful sunrise