Author Topic: how forgiving is yew?  (Read 2332 times)

0 Members and 1 Guest are viewing this topic.

Offline simk

  • Member
  • Posts: 1,146
how forgiving is yew?
« on: January 20, 2019, 01:03:30 pm »
Howdy, this pics are from a planed down yew - has some rings cut on the back. I will sinew it but wonder if I will be able to achieve pretiller/full brace without neckbreaking?
 (--)
--- the queen rules ----

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: how forgiving is yew?
« Reply #1 on: January 20, 2019, 01:06:52 pm »
I wouldnt risk it,, thats just me,, I would put the sinew on before trying to brace it,, (f)

Offline Del the cat

  • Member
  • Posts: 8,291
    • Derek Hutchison Native Wood Self Bows
Re: how forgiving is yew?
« Reply #2 on: January 20, 2019, 01:11:26 pm »
I'd back it with boo, hickory or Yew sapwood :)
Del
Health warning, these posts may contain traces of nut.

Offline DC

  • Member
  • Posts: 10,396
Re: how forgiving is yew?
« Reply #3 on: January 20, 2019, 01:12:22 pm »
I wouldnt risk it,, thats just me,, I would put the sinew on before trying to brace it,, (f)

+1 but I would probably back it with Bamboo :D

Offline simk

  • Member
  • Posts: 1,146
Re: how forgiving is yew?
« Reply #4 on: January 20, 2019, 01:28:07 pm »
It's not exactly was I was hoping to read - you are discouraging me  O:) Maybe better only longstringig it a bit before sinewing. I'f I had tapered boo around it would be an easy job now and a good idea. Thank you. It's the first time I have planed down a stave. 
--- the queen rules ----

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: how forgiving is yew?
« Reply #5 on: January 20, 2019, 01:37:41 pm »
the guys are giving hard earned advice,, if you gonna sinew it, at least put one layer of sinew on before you long string it,, if it was me and I was set on sinew,, I would get it even and put the sinew on,, then long string or brace,,
but I am a little paranoid,, (--)

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,491
Re: how forgiving is yew?
« Reply #6 on: January 20, 2019, 02:19:08 pm »
You could test it by floor tiller without damaging it. At least you could see the bend of each limb and compare weight between the 2 limbs.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline simk

  • Member
  • Posts: 1,146
Re: how forgiving is yew?
« Reply #7 on: January 20, 2019, 02:34:56 pm »
pat, i'm already pretty sure about my calipered taper yet but it's still way too strong for sinewing yet. I have to remove wood anyway before sinewing and just tryin' to somehow optimize tiller before putting in some some additional reflex in the working limbs and sinewing  :BB
I'll be careful, thanx! (--)
« Last Edit: January 20, 2019, 02:56:52 pm by simk »
--- the queen rules ----

Offline PatM

  • Member
  • Posts: 6,737
Re: how forgiving is yew?
« Reply #8 on: January 20, 2019, 03:02:47 pm »
Tiller it by bending it backwards.  You're going to do that anyway if you sinew.  If it bends nicely backwards it will bend very close the opposite way when you brace it.

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: how forgiving is yew?
« Reply #9 on: January 20, 2019, 03:40:34 pm »
that souns like a good plan,, :)