Author Topic: Question for some bicycle guy  (Read 1658 times)

0 Members and 1 Guest are viewing this topic.

Offline DC

  • Member
  • Posts: 10,396
Question for some bicycle guy
« on: February 18, 2019, 04:50:11 pm »
I was just cutting up an old bike tube and I noticed it had this instead of the usual Schrader valve. Is this new or just different? Never seen one of these.

Offline jeffhalfrack

  • Member
  • Posts: 438
Re: Question for some bicycle guy
« Reply #1 on: February 18, 2019, 05:03:20 pm »
No not new it's called a presta valve been around for a very long time ,,,in my other (thinner) life I was a bicycle racer,,,,,,,you learn to have a love hate relationship with those  ,,,,btw ther is an adapter to fill those with a schrader  type pump also a rubber gromet to adapt to a schrader valve  rim  to fill you have to un screw the stem slightly fill then tighten down (oh the failures I've had ) good luck jeffw

Offline DC

  • Member
  • Posts: 10,396
Re: Question for some bicycle guy
« Reply #2 on: February 18, 2019, 05:34:47 pm »
Thanks Jeff. Now that you told me what it's called I could Google it. I've learned something today. Don't think I'll ever use my new found knowledge but what the hey ;D ;D

Offline the barkman

  • Member
  • Posts: 9
Re: Question for some bicycle guy
« Reply #3 on: March 31, 2019, 02:16:20 pm »
Interestingly enough,

 if you take the little,

cone-shaped plastic cap that comes with a presta

valve and snip off the top 3 milimetres and re-place

it on the valve it acts just like a Schrader valve.   

Offline Hawkdancer

  • Member
  • Posts: 5,027
Re: Question for some bicycle guy
« Reply #4 on: March 31, 2019, 10:55:34 pm »
Really do learn something new everyday - never saw one of those before!  But I put the "no more flats" on my road bike!  Tubes in the mountain bike!  But the tires don't stop sand spurs!  Plan to make tie down straps with any tubes kicking around! >:D
Hawkdancer
Life is far too serious to be taken that way!
Jerry