Author Topic: Tray for a friend  (Read 1995 times)

0 Members and 1 Guest are viewing this topic.

Offline Hawkdancer

  • Member
  • Posts: 5,027
Tray for a friend
« on: April 20, 2019, 10:14:38 am »
Took a bit of time from the Osage stave to make a tray for a friend, sort of replicating the old wooden cases soda used to come in.  Took a bit of eyeballing and sanding, drilled out the handle grips, and finished with spar urethane.  Got the spalted maple from a pile of off cuts at Wodcraft.  Did learn that the adage " Measure twice, cut once" also applies to drilling screw pilot holes, but was able to save those boards for another project!
Hawkdancer

https://i.imgur.com/Cvi40YB_d.jpg?maxwidth=640&shape=thumb&fidelity=medium
Life is far too serious to be taken that way!
Jerry

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,461
Re: Tray for a friend
« Reply #1 on: April 20, 2019, 10:28:31 am »
That's cool, Hawk.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline JEB

  • Member
  • Posts: 1,735
Re: Tray for a friend
« Reply #2 on: April 20, 2019, 02:10:15 pm »
Very nice. Osage is one of my favorite woods.

Offline BrianS

  • Member
  • Posts: 974
Re: Tray for a friend
« Reply #3 on: April 20, 2019, 03:02:30 pm »
Nice work

Offline helmet

  • Member
  • Posts: 168
Re: Tray for a friend
« Reply #4 on: April 20, 2019, 05:45:55 pm »
That is cool :)

Offline Deerhunter21

  • Member
  • Posts: 2,253
  • What do you despise? By this are you truly known.
Re: Tray for a friend
« Reply #5 on: April 20, 2019, 08:15:50 pm »
I made a bowl out of that same wood. very pretty
Life before death. Strength before weakness. Journey before destination.

Online bjrogg

  • Member
  • Posts: 10,732
  • Cedar Pond
Re: Tray for a friend
« Reply #6 on: April 21, 2019, 08:45:42 am »
Nice tray Jerry.
Bjrogg
A hot cup of coffee and a beautiful sunrise

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,884
  • Eddie Parker
Re: Tray for a friend
« Reply #7 on: April 21, 2019, 02:52:19 pm »
That looks fantastic, Jerry.
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Trapper Rob

  • Member
  • Posts: 3,718
Re: Tray for a friend
« Reply #8 on: April 21, 2019, 05:45:55 pm »
looks nice.

Offline Hawkdancer

  • Member
  • Posts: 5,027
Re: Tray for a friend
« Reply #9 on: April 21, 2019, 10:56:50 pm »
Thanks, everybody!  Jacie delivered it and our friend's comment was - it almost too nice to use!  I do hope she uses it, I think it will hold more than she can lift!  Maybe I can restore the original Pepsi case for her, too!
Hawkdancer
Life is far too serious to be taken that way!
Jerry