Author Topic: fixing the worst of the worst, getting it done  (Read 1708 times)

0 Members and 1 Guest are viewing this topic.

Offline Eric Krewson

  • Member
  • Posts: 3,601
fixing the worst of the worst, getting it done
« on: May 14, 2019, 10:23:28 am »
Here goes;

First I glued all the parts back together to give me a surface to glue to. The string acts as a very strong clamp for irregular shapes.

Offline Eric Krewson

  • Member
  • Posts: 3,601
Re: fixing the worst of the worst, getting it done
« Reply #1 on: May 14, 2019, 10:24:19 am »
Next I filed away all the previous overlays;

Offline Eric Krewson

  • Member
  • Posts: 3,601
Re: fixing the worst of the worst, getting it done
« Reply #2 on: May 14, 2019, 10:25:17 am »
I bent a new overlay on the same form I bent the static tips;


Offline Eric Krewson

  • Member
  • Posts: 3,601
Re: fixing the worst of the worst, getting it done
« Reply #3 on: May 14, 2019, 10:26:31 am »
Test fit, pretty good;

Offline Eric Krewson

  • Member
  • Posts: 3,601
Re: fixing the worst of the worst, getting it done
« Reply #4 on: May 14, 2019, 10:28:50 am »
Glued up and waiting for the next step;

Online bradsmith2010

  • Member
  • Posts: 3,374
Re: fixing the worst of the worst, getting it done
« Reply #5 on: May 14, 2019, 11:46:29 am »
looking good,, )P(

Offline hoosierf

  • Member
  • Posts: 339
Re: fixing the worst of the worst, getting it done
« Reply #6 on: May 14, 2019, 06:29:00 pm »
Nice job. If I tried that the overlay would pop right off. Doh!

Offline NorthHeart

  • member
  • Member
  • Posts: 439
Re: fixing the worst of the worst, getting it done
« Reply #7 on: May 14, 2019, 08:11:21 pm »
Nice!

Offline Eric Krewson

  • Member
  • Posts: 3,601
Re: fixing the worst of the worst, getting it done
« Reply #8 on: May 16, 2019, 01:57:22 pm »
A blurry picture but the first lam is on;


Offline Eric Krewson

  • Member
  • Posts: 3,601
Re: fixing the worst of the worst, getting it done
« Reply #9 on: May 16, 2019, 02:03:18 pm »
The second lam turned out to be a real pain to get bent just right. The first lam could be any shape and it would go on perfectly. The second one had to be perfectly bent for a perfect fit with no tension that might weaken the glue line.

I made 4 different forms and bent the wood at least a dozen times but it never fit good enough end to end. I finally used my contour gage to give me a good pattern to cut my 4th bending form. 




Offline Eric Krewson

  • Member
  • Posts: 3,601
Re: fixing the worst of the worst, getting it done
« Reply #10 on: May 16, 2019, 02:05:25 pm »
A little sanding and filing and the fit is gap free.


Offline Eric Krewson

  • Member
  • Posts: 3,601
Re: fixing the worst of the worst, getting it done
« Reply #11 on: May 16, 2019, 02:07:45 pm »
I got out of sequence, this is the improved perfect match form bending the last lam.


Offline Eric Krewson

  • Member
  • Posts: 3,601
Re: fixing the worst of the worst, getting it done
« Reply #12 on: May 16, 2019, 02:09:04 pm »
I will put on a long nock overlay later to further strengthen the static bend so there won't be a chance of it flexing.

Waiting for the glue to cure;

« Last Edit: May 16, 2019, 02:13:02 pm by Eric Krewson »

Offline JW_Halverson

  • Member
  • Posts: 11,082
    • Black Hills Raptor Center
Re: fixing the worst of the worst, getting it done
« Reply #13 on: May 16, 2019, 02:59:45 pm »
It's like watching a surgeon reattach a severed limb!
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline doulosparachristos

  • Member
  • Posts: 145
Re: fixing the worst of the worst, getting it done
« Reply #14 on: May 17, 2019, 03:02:43 pm »
Iím already loving this!
Philippians 3: 7-11