Author Topic: Maple Short Bow for Hunting?  (Read 8923 times)

0 Members and 1 Guest are viewing this topic.

Offline Mountain Man1

  • Member
  • Posts: 50
Re: Maple Short Bow for Hunting?
« Reply #15 on: May 25, 2019, 09:16:59 pm »
Alright so here it is 56" tip to tip, 2" to mid, 1/2" nocks, 7" tips. Handle is 3" with 2"fades. https://photos.app.goo.gl/N1UmR5DgbNpzof2S7

Offline SLIMBOB

  • Member
  • Posts: 3,759
  • Deplorable Slim
Re: Maple Short Bow for Hunting?
« Reply #16 on: May 26, 2019, 05:36:42 am »
Are you making it with a stiff handle?
Liberty, In God We Trust, E Pluribus Unum.  Distinctly American Values.

Offline Mountain Man1

  • Member
  • Posts: 50
Re: Maple Short Bow for Hunting?
« Reply #17 on: May 26, 2019, 05:42:01 am »
Planning to make the handle bend slightly.

Offline burchett.donald

  • Member
  • Posts: 2,436
Re: Maple Short Bow for Hunting?
« Reply #18 on: May 26, 2019, 06:04:59 am »
Mountain Man, I clicked on the link but couldn't see picture...
Genesis 27:3 Now therefore take, I pray thee, thy weapons, thy quiver and thy bow, and go out to the field, and take me some venison;

Offline SLIMBOB

  • Member
  • Posts: 3,759
  • Deplorable Slim
Re: Maple Short Bow for Hunting?
« Reply #19 on: May 26, 2019, 06:33:45 am »
I ask because you referenced fades. At 56 inches I would make it bend right thru the handle. You won’t need fades. Unless you are doing an Ishi type bow?
I couldn’t get to the pics either.
Liberty, In God We Trust, E Pluribus Unum.  Distinctly American Values.

Offline Mountain Man1

  • Member
  • Posts: 50
Re: Maple Short Bow for Hunting?
« Reply #20 on: May 26, 2019, 05:43:38 pm »
Going 2" for limbed so I need to narrow for a handle so there will be fades, however the thickness will only change slightly. Still trying to pics sorted out, might need to higher a tech department for thathaha

Offline burchett.donald

  • Member
  • Posts: 2,436
Re: Maple Short Bow for Hunting?
« Reply #21 on: May 26, 2019, 05:45:04 pm »
PM sent...Email the pics and I will be glad to post...
                                                                              Don
Genesis 27:3 Now therefore take, I pray thee, thy weapons, thy quiver and thy bow, and go out to the field, and take me some venison;

Offline Mountain Man1

  • Member
  • Posts: 50
Re: Maple Short Bow for Hunting?
« Reply #22 on: June 02, 2019, 10:46:17 am »
https://flic.kr/p/2g7rm6U
There, I think I finally got the pics figured. If it works I will add more

Offline Mountain Man1

  • Member
  • Posts: 50
Re: Maple Short Bow for Hunting?
« Reply #23 on: June 02, 2019, 11:02:59 am »
https://flic.kr/p/2g7s8Pr
Good one here of limb profile. Hope it turns out for me. I really like the look of it

Offline SLIMBOB

  • Member
  • Posts: 3,759
  • Deplorable Slim
Re: Maple Short Bow for Hunting?
« Reply #24 on: June 02, 2019, 11:52:20 am »
That looks nice.  I still question your handle.  Is it a bendy, or are you glueing something on it?
Liberty, In God We Trust, E Pluribus Unum.  Distinctly American Values.

Offline Mountain Man1

  • Member
  • Posts: 50
Re: Maple Short Bow for Hunting?
« Reply #25 on: June 03, 2019, 03:32:24 pm »
The intention is to have the handle flex a little bit but I'm going to watch it very closely when I start tillering, if its flexing a lot I will be adding a piece and go with a stiff handle for some added insurance. I think I've left it thick enough to be okay but i always like to have a backup plan.

Offline bassman

  • Member
  • Posts: 962
Re: Maple Short Bow for Hunting?
« Reply #26 on: June 03, 2019, 05:11:45 pm »
If that is red maple you will probably need a back up plan. Now if it is sugar maple then it will make a good bow.The soft maples are a poor choice for bow wood.Hope it works for you,but it will be a long shot if it is soft maple.

Offline SLIMBOB

  • Member
  • Posts: 3,759
  • Deplorable Slim
Re: Maple Short Bow for Hunting?
« Reply #27 on: June 03, 2019, 05:40:03 pm »
That’s a tough act to pull off.
Liberty, In God We Trust, E Pluribus Unum.  Distinctly American Values.

Offline Mountain Man1

  • Member
  • Posts: 50
Re: Maple Short Bow for Hunting?
« Reply #28 on: June 16, 2019, 10:18:09 am »
So I've got the shape pretty much where I want and started getting the belly flat and even in prep for tillering. Am I correct in assuming backing should go on before tillering? If not I worry about it surviving the process. Is birch bark a good option? I have tons and think it would look awesome with minimal weight. It will either be that or dog chew rawhide.

Offline SLIMBOB

  • Member
  • Posts: 3,759
  • Deplorable Slim
Re: Maple Short Bow for Hunting?
« Reply #29 on: June 16, 2019, 10:32:47 am »
If it were me, and I have never done Birch Bark, but I have used other backings.  I would get it tillered first before the backing.  Get the brace tiller spot on perfect, then get it tillered out some distance your comfortable with, 15 inches or so, maybe even 20, and get the tiller looking good at that point.  Then put your bb or rawhide on.  I am assuming you are concerned it will snap without the backing if you go out to full draw?
Liberty, In God We Trust, E Pluribus Unum.  Distinctly American Values.