Author Topic: two flutes  (Read 3033 times)

0 Members and 1 Guest are viewing this topic.

Offline 1442

  • Member
  • Posts: 1,020
two flutes
« on: May 24, 2019, 02:05:08 am »
I had some thoughts on fluting shared with me at the Pedernales knap in recently.
Just what I needed to get me back on track and make me realize what wuz causing all the failures I been having lately.
I got two in a row to flute to the tip so it seems to be working well.
Thanks to the two peoples who give me advice. here's two for you two. :OK :OK
 

Offline GlisGlis

  • Member
  • Posts: 1,477
Re: two flutes
« Reply #1 on: May 24, 2019, 09:42:27 am »
soooo nice  :OK
would love to see one hafted  )P(    (-_)

Offline 1442

  • Member
  • Posts: 1,020
Re: two flutes
« Reply #2 on: May 24, 2019, 09:03:48 pm »
Thanks GlisGlis.
I'll send you one if you want to haft it.
I been gonna haft one but just haven't yet.


Offline nclonghunter

  • Member
  • Posts: 1,779
Re: two flutes
« Reply #3 on: May 25, 2019, 05:58:45 pm »
Very nice, inquiring minds want to know?
There are no bad knappers, only bad flakes

Offline 1442

  • Member
  • Posts: 1,020
Re: two flutes
« Reply #4 on: May 25, 2019, 11:17:03 pm »
I was not thinning the base much and my preforms where more wedge shaped than having a convex contour for the flute to travel over.
When taking the flakes on each side,  to create the nipple, I was getting above center line causing the angle to be steep and short, which leaves more mass in the areas where the flute initiates and spreads out.
I was making the platforms too wide also which required a lot of force to get them to release.

A lot of force on a wedge shaped preform was causing the flutes to dive out the back side, The short set up flakes where causing the bulb to be more pronounced and deeper which allowed the ears to just collapse and snap off.


 

Offline GlisGlis

  • Member
  • Posts: 1,477
Re: two flutes
« Reply #5 on: May 26, 2019, 11:36:16 am »
Quote
Thanks GlisGlis.
I'll send you one if you want to haft it.
that's a very generous offer. thank you.
Unfortunatly I'm on the other side of atlantic sea and shipping will be overkill
Anyway watching your posts and your youtubes is always a pleasure  :OK

Offline Deerhunter21

  • Member
  • Posts: 2,253
  • What do you despise? By this are you truly known.
Re: two flutes
« Reply #6 on: May 26, 2019, 03:08:52 pm »
Great job! At the marshalls I bought a flintknaping kit and and made some ok points! I would post them but I’m in the car.  :KN
Life before death. Strength before weakness. Journey before destination.

Offline nclonghunter

  • Member
  • Posts: 1,779
Re: two flutes
« Reply #7 on: May 26, 2019, 08:49:14 pm »
1442, Thank you for the set up info. Are you using a jig, free hand indirect or something else?
There are no bad knappers, only bad flakes

Offline 1442

  • Member
  • Posts: 1,020
Re: two flutes
« Reply #8 on: May 26, 2019, 11:11:56 pm »
i'm using a Solberger jig