« previous next »
Pages: 1 [2]

Author Topic: Started a horn project  (Read 14242 times)

0 Members and 1 Guest are viewing this topic.

Offline JW_Halverson

  • Member
  • Posts: 11,850
Re: Started a horn project
« Reply #15 on: October 17, 2019, 08:43:29 pm »
Spout drilled out. Always the hairiest part of the job.
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,885
  • Eddie Parker
Re: Started a horn project
« Reply #16 on: October 18, 2019, 06:08:39 am »
I'll get you some pictures of the priming horn when I get home. And, I'm turning plugs if you need some.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline JW_Halverson

  • Member
  • Posts: 11,850
Re: Started a horn project
« Reply #17 on: October 18, 2019, 08:10:02 pm »
Grabbed a couple used/worn fiddle pegs at the music store this morning. Fitted a rosewood peg to the horn.
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline JW_Halverson

  • Member
  • Posts: 11,850
Re: Started a horn project
« Reply #18 on: October 18, 2019, 08:11:33 pm »
Now comes the fiddly-diddly, time consuming and ultra-tedious effort of sanding everything to a satin finish in preparation to polish.
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline sleek

  • Member
  • Posts: 6,681
Re: Started a horn project
« Reply #19 on: October 19, 2019, 06:00:18 am »
I like the fiddle peg. That looks real nice  and a neat idea for repurpose.
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline JW_Halverson

  • Member
  • Posts: 11,850
Re: Started a horn project
« Reply #20 on: October 19, 2019, 09:33:09 am »
Quote from: sleek on October 19, 2019, 06:00:18 am
I like the fiddle peg. That looks real nice  and a neat idea for repurpose.

Rings the bell on every count. It is seriously HARD wood as they are always top quality ebony or rosewood. They are tapered very slightly, so they create a very tight fit. And the head is both decorative and ergonomically designed for good grip.
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,885
  • Eddie Parker
Re: Started a horn project
« Reply #21 on: October 19, 2019, 03:07:47 pm »
John, Go to page 4, to the thread " Let's see those horns". You posted a picture of the full set you sent me there.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline JW_Halverson

  • Member
  • Posts: 11,850
Re: Started a horn project
« Reply #22 on: October 25, 2019, 03:22:18 pm »
Today I blackened the horn using Sharpie. Now I start going over the carvings with finer grade sandpaper and a card scraper. Any tool mark or scratch will reveal itself.
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline JW_Halverson

  • Member
  • Posts: 11,850
Re: Started a horn project
« Reply #23 on: October 29, 2019, 11:12:37 pm »
Two packages in the mail today, a book I had ordered online and some horns PatB sent to me.


Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,491
Re: Started a horn project
« Reply #24 on: October 29, 2019, 11:35:47 pm »
I hope those will work for you, John.   :OK
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline chamookman

  • Member
  • Posts: 2,977
Re: Started a horn project
« Reply #25 on: October 30, 2019, 02:24:06 am »
That's a great Book ! Bob
Logged
"May the Gods give Us the strength to draw the string to the cheek, the arrow to the barb and loose the flying shaft, so long as life may last." Saxon Pope - 1923.

Offline JW_Halverson

  • Member
  • Posts: 11,850
Re: Started a horn project
« Reply #26 on: October 31, 2019, 03:25:13 pm »
Quote from: Pat B on October 29, 2019, 11:35:47 pm
I hope those will work for you, John.   :OK

There is some good material in there for me, that's for sure.
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Parnell

  • Member
  • Posts: 5,551
Re: Started a horn project
« Reply #27 on: November 01, 2019, 08:26:25 am »
Looking really nice, JW!  This is a piece of the craft that I'm looking forward to learning more about.  I really like the octagonal shaping and   how the coloring will go.  I think I'll be copying your thought process here in the future!  It's gonna be a beauty.
Logged
1’—>1’

Offline Tracker0721

  • Member
  • Posts: 736
Re: Started a horn project
« Reply #28 on: February 01, 2020, 07:30:40 am »
So that’s how you got the spout end black. I was gonna ask if it was 2 different horns or something. That’s a smart idea, it really looks good.
Logged
May my presence go unnoticed, may my shot be true, may the blood trail be short. Amen.

Offline JW_Halverson

  • Member
  • Posts: 11,850
Re: Started a horn project
« Reply #29 on: February 01, 2020, 08:01:59 pm »
A better way to blacken the spout end of the horn is to make up a strong solution of potassium permanganate and soak the horn in it. It penetrates beyond the surface and allows for a polished finish.
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.
Pages: 1 [2]
« previous next »