Author Topic: Started a horn project  (Read 14106 times)

0 Members and 1 Guest are viewing this topic.

Offline JW_Halverson

  • Member
  • Posts: 11,823
Started a horn project
« on: October 10, 2019, 04:56:30 pm »
While I have been waiting for several horn blanks to be shipped, I decided to start on the carry strap. Several frustrating hours into the project I realized I had forgotten all the techniques for finger weaving woolen yarn. Then I remembered an inkle loom maniac owed me a small favor. I contacted her and listed several colors I wanted. Within several hours she sent me a photograph of the finished powder horn woven of hand dyed woolen yarn. I will finish off the ends with leatherwork appropriate to the powderhorn when it is finished.

Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,461
Re: Started a horn project
« Reply #1 on: October 10, 2019, 09:56:52 pm »
That's niiiice!   ;D   8)
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Hawkdancer

  • Member
  • Posts: 5,027
Re: Started a horn project
« Reply #2 on: October 10, 2019, 10:38:34 pm »
Very neat job!  That will make the horn look good!
Hawkdancer
Life is far too serious to be taken that way!
Jerry

Offline JW_Halverson

  • Member
  • Posts: 11,823
Re: Started a horn project
« Reply #3 on: October 10, 2019, 10:51:51 pm »
That's niiiice!   ;D   8)

Glad you like it.
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline chamookman

  • Member
  • Posts: 2,971
Re: Started a horn project
« Reply #4 on: October 11, 2019, 02:56:17 am »
Way cool JW  :OK ! Bob
"May the Gods give Us the strength to draw the string to the cheek, the arrow to the barb and loose the flying shaft, so long as life may last." Saxon Pope - 1923.

Offline Parnell

  • Member
  • Posts: 5,551
Re: Started a horn project
« Reply #5 on: October 15, 2019, 08:42:49 am »
Wow, doesn't take her long.  Good looking piece of work, JW.
1’—>1’

Offline JW_Halverson

  • Member
  • Posts: 11,823
Re: Started a horn project
« Reply #6 on: October 15, 2019, 02:29:31 pm »
A wee bit of time with a lathe and some walnut. We have a plug!
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,461
Re: Started a horn project
« Reply #7 on: October 15, 2019, 02:50:57 pm »
Keeps getting gooder and gooder.  8)
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline JW_Halverson

  • Member
  • Posts: 11,823
Re: Started a horn project
« Reply #8 on: October 16, 2019, 09:36:25 pm »
Tonight I got some Hands-On therapy to help me fix the bad space my head was in. Everyday is born full of potential and opportunity. Today was one of those days, but everything seemed to go wrong.

Tearing into this horn was my way of getting back some of that potential. At least I can see progress in a physical form on the bench.
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline JW_Halverson

  • Member
  • Posts: 11,823
Re: Started a horn project
« Reply #9 on: October 16, 2019, 10:17:13 pm »
Octogon segment roughed in now.
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,461
Re: Started a horn project
« Reply #10 on: October 16, 2019, 10:25:42 pm »
You are out doing yourself, John but I know how important therapy can be. Keep up the good work.   ::)
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Hawkdancer

  • Member
  • Posts: 5,027
Re: Started a horn project
« Reply #11 on: October 16, 2019, 11:18:27 pm »
Looking good, JW!  Remember "illegitimate non carborundum"!  Or Don't let the bas***ds grind you down!
Hawkdancer
Life is far too serious to be taken that way!
Jerry

Offline JW_Halverson

  • Member
  • Posts: 11,823
Re: Started a horn project
« Reply #12 on: October 17, 2019, 03:20:50 pm »
Looking good, JW!  Remember "illegitimate non carborundum"!  Or Don't let the bas***ds grind you down!
Hawkdancer

Well, this bass turd is grinding down, well-scraping really, the horn.

I plan on dying the lower end of the horn that is modified/shaped with a combination of black and cocoa brown RIT dye. The upper end will be left in it's natural color.

Now I gotta remember where I put the last dozen ebony fiddle pegs I bought years ago just for this purpose. I DO remember I was going to put them right where I would never forget them, that much I remember. What am I saying? I am going to make a trip to Haggarty's just to buy another $2 fiddlepeg.
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,884
  • Eddie Parker
Re: Started a horn project
« Reply #13 on: October 17, 2019, 03:27:33 pm »
Sweet, JW! I'm glad to see you finally got started on another one for me ;D 8). just kidding, if you can't find your fiddle peg let me know. I have some.
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline JW_Halverson

  • Member
  • Posts: 11,823
Re: Started a horn project
« Reply #14 on: October 17, 2019, 08:20:02 pm »
Sweet, JW! I'm glad to see you finally got started on another one for me ;D 8). just kidding, if you can't find your fiddle peg let me know. I have some.

If, by chance, you still have that little bison priming horn, could you send me a.photo?  I cannot find any images of it.

I might be buying a bench too turning lathe. Turning spouts and base plugs suddenly gets much easier. I might be doing a few more horns!

Tonite's progress:
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.