Author Topic: On the same Antler  (Read 2207 times)

0 Members and 1 Guest are viewing this topic.

Offline bjrogg

  • Member
  • Posts: 10,701
  • Cedar Pond
On the same Antler
« on: January 14, 2020, 02:28:25 pm »
Two smaller knives. The handles are both from the same Antler. Smaller point flint ridge and larger one dacite.
Bjrogg
A hot cup of coffee and a beautiful sunrise

Offline Hawkdancer

  • Member
  • Posts: 5,027
Re: On the same Antler
« Reply #1 on: January 15, 2020, 12:05:06 am »
Nice!  I better get around to chipping "glass"!  Those would look good in mahogany obsidian!  On the other hand, I still have to rehaft a blade the dog chewed up the sheath and the hating!  Some years back!
Hawk dancer
Life is far too serious to be taken that way!
Jerry

Offline WhistlingBadger

  • Member
  • Posts: 1,574
  • Future Expert
Re: On the same Antler
« Reply #2 on: January 15, 2020, 09:25:01 am »
Great looking work!  So, BJ, do you use these knives or are they mostly just for display?  They look too pretty to use, and too pretty not to use, if you know what I mean.  If you use them, how do you sharpen them?
T
Thomas
Lander, Wyoming
"The trail is the thing, not the end of the trail.
Travel too fast, and you miss all you are traveling for."
~Louis L'Amour

Offline bjrogg

  • Member
  • Posts: 10,701
  • Cedar Pond
Re: On the same Antler
« Reply #3 on: January 15, 2020, 11:13:36 am »
Thanks Jerry
Thanks WB. To answer your question. I wouldn't call it using them. I've cut up apples and some light stuff like that. I have my favorite skinning knife and I don't even like using a different steel one.

I'm still not nearly as good as the really good guys. I keep getting a little better though. I'm sure they could be used. I think the stone ones would probably hold a edge better than the Obsidian ones.

I really enjoy making them for display though. I like putting all the stuff the good lord gave us together and letting it complement each other.

I give most for gifts. Sell a few. Keep a bunch for myself in display in my man cave.

Bjrogg
A hot cup of coffee and a beautiful sunrise

Offline Trapper Rob

  • Member
  • Posts: 3,718
Re: On the same Antler
« Reply #4 on: January 15, 2020, 12:22:12 pm »
Those look nice BJ

Offline bjrogg

  • Member
  • Posts: 10,701
  • Cedar Pond
Re: On the same Antler
« Reply #5 on: January 15, 2020, 02:36:00 pm »
Thanks Rob.

Oh also WB. Only way I know to resharpen is to take off some flakes again
Bjrogg
A hot cup of coffee and a beautiful sunrise

Offline TimBo

  • Member
  • Posts: 1,029
Re: On the same Antler
« Reply #6 on: January 23, 2020, 10:08:59 am »
The wood "end plug" idea is neat.  I may try that out on my next antler handle...there is still a blade on my workbench that needs one.

Offline bjrogg

  • Member
  • Posts: 10,701
  • Cedar Pond
Re: On the same Antler
« Reply #7 on: January 23, 2020, 12:07:51 pm »
Thanks Tim. I just finished one up with a button on a jaw bone. I like it. Have to post a picture of it.
Bjrogg
A hot cup of coffee and a beautiful sunrise