Author Topic: Birch bark oil  (Read 7006 times)

0 Members and 1 Guest are viewing this topic.

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Birch bark oil
« Reply #15 on: June 07, 2020, 07:42:03 am »
I got oil from real old very dry birch bark myself.It should be quality bark though I guess.Any extra weight in fresh bark has to be just moisture.The oils in it don't evaporate while drying.
The whole process should take around 5 to 6 hours,with hot coals around and on top of gallon can for at least 3 to 4 hours,with the extra 2 hours of cooling off time to make it 5 to 6 hours.
« Last Edit: June 07, 2020, 10:21:44 am by BowEd »
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline paulc

  • Member
  • Posts: 642
Re: Birch bark oil
« Reply #16 on: July 13, 2020, 10:39:54 am »
It seems I have made birch pitch glue!!! So stoked! Thanks so much BowEd!!

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Birch bark oil
« Reply #17 on: July 14, 2020, 10:03:49 pm »
It must have gotten pretty warm in that bottom can to harden your oil.No matter though.It can be used as pitch too.I believe turpentine added might rejuvenate it back to an oil state.
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline paulc

  • Member
  • Posts: 642
Re: Birch bark oil
« Reply #18 on: July 15, 2020, 09:40:18 am »
It was actually on purpose...I knew I had crud in the bottom of my oil jar from a couple dirty burns.  I let it all settle for a couple days and then poured off the clean oil and left the sludge behind.  I simmered it a couple times till it seemed to harden so that my finger nail will just barely dent it once it is cool.  So I have oil and pitch now.  Time to make something with'em!  Paul

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Birch bark oil
« Reply #19 on: July 16, 2020, 06:14:55 am »
Cool....It's some very useful stuff....Bomb proof!!
I usually make pitch from resin/charcoal/and some dry matter.
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,884
  • Eddie Parker
Re: Birch bark oil
« Reply #20 on: July 17, 2020, 08:40:14 am »
I have some thick, old birch bark I'm going to try it with. We don't have birch down here but we do have an invasive tree that should work, Maeluca, or "paper" tree. I know they use the oil for lots of lotions and different things. I think I'll try it to and see what happens.
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Birch bark oil
« Reply #21 on: July 17, 2020, 06:08:48 pm »
Good deal Eddie.Let me know how it turns out.I can't vouch for it though.Only birch bark.
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline paulc

  • Member
  • Posts: 642
Re: Birch bark oil
« Reply #22 on: July 18, 2020, 07:30:28 am »
I was wondering about some of these pines all over south Georgia...and surface area/yield...like prune a bunch of branches, cut to fit vertically in paint can and render that...

Might be worth a shot....P