« previous next »
Pages: [1]

Author Topic: Stitching leather  (Read 3337 times)

0 Members and 1 Guest are viewing this topic.

Offline Ricardovanleeuwen

  • Member
  • Posts: 403
Stitching leather
« on: April 25, 2020, 04:41:42 am »
Hello, i gathered enough leather to make a quiver, i wanna Stitch It with b55 Just because i wouldnt like to get It ripped open. I have a question about stitches.. i dont know wich kind of Stitch to use best?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Stitching leather
« Reply #1 on: April 25, 2020, 06:47:24 am »
I use a saddle stitch for quivers and bags. If you don't know, a saddle stitch is one long thread with a needle on each end. Both needles go in the same hole but from different sides, pulled tight then on to the next one. A running stitch will work too but not as strong. You could also use lacing instead of thread for a more rugged look.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Ricardovanleeuwen

  • Member
  • Posts: 403
Re: Stitching leather
« Reply #2 on: April 25, 2020, 12:03:40 pm »
I think i stick to the b55 since its really strong and i can also put the Stitch close to each other so the edge Will stiffen up
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Stitching leather
« Reply #3 on: April 25, 2020, 03:24:30 pm »
Looking forward to seeing it when done.   :OK
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Hawkdancer

  • Member
  • Posts: 5,039
Re: Stitching leather
« Reply #4 on: April 25, 2020, 11:31:04 pm »
If you are sewing stiffer leather, be sure your holes are big enough.  Also make sure you have enough room to work on the inside of your stitch, if necessary!
Hawkdancer
Logged
Life is far too serious to be taken that way!
Jerry

Offline GlisGlis

  • Member
  • Posts: 1,558
Re: Stitching leather
« Reply #5 on: April 26, 2020, 04:34:04 am »
Quote
Hello, i gathered enough leather to make a quiver, i wanna Stitch It with b55 Just because i wouldnt like to get It ripped open

you can always glue before stitching for extra insurance
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: Stitching leather
« Reply #6 on: April 26, 2020, 11:04:21 am »
I made a hole punch from an old stainless steel fork. Shorten and twist the tines and then sharpen them easy peasy ;). Nice even spacing for your holes. I brazed it to a bolt to make it a little more robust but I don't think it's necessary.
Logged

Offline Ricardovanleeuwen

  • Member
  • Posts: 403
Re: Stitching leather
« Reply #7 on: April 26, 2020, 02:46:08 pm »
Quote from: Hawkdancer on April 25, 2020, 11:31:04 pm
If you are sewing stiffer leather, be sure your holes are big enough.  Also make sure you have enough room to work on the inside of your stitch, if necessary!
Hawkdancer
what you mean with inside of the Stitch? 
Logged

Offline Ricardovanleeuwen

  • Member
  • Posts: 403
Re: Stitching leather
« Reply #8 on: April 26, 2020, 03:36:59 pm »
Smart hole punch, i dont have a old fork, only have one and that's a bendy handle(lol)
 Might use a Saw blade for It wich is used on the Bahco brand hacksaws for Wood. I also Saw An old mauntainbike at the garbage so might try to get a gearing from it and sharpen the points so i have a roller punch, if none Will work out il use my fork to press Dots in the leather and Just use An awl
Logged
Pages: [1]
« previous next »