Author Topic: Osage Orange gull wing hollow design 40#@28''  (Read 5998 times)

0 Members and 1 Guest are viewing this topic.

Offline liyeliye123123

  • Member
  • Posts: 61
Osage Orange gull wing hollow design 40#@28''
« on: April 30, 2020, 08:59:29 pm »
The story of this bow started years before I even started making selfbows. I cut this small diameter Osage tree at my neighbor’s backyard because he needed some help and I could keep the wood. The tree was full of small brunches and was not straight at all. Back then, I didn’t know anything about bow making, so I had no idea what to do with the wood, yet I have this tiny piece of thought in my mind that maybe someday in the future I could use it for something. One or two years later as I shared before, I started making bows and got addicted with it. But even in my early bow making days when I look at this piece of wood, I felt it was impossible to turn this gnarly wood into a bow. With my bow making skills getting better I have better understandings of what can be turned into a bow. I didn’t have a good design for this wood until I saw Weylin’s yew hollow limb bow. It was really mind blowing and I was like woooooow!! It opened a new world for me. I never knew that bow making can be done this way. Then I spent hours and days looking at the wood and thinking about designs and how to layout the bow. But still, I didn’t have enough courage to start the project because I know it would be a ton of scraping and not sure if it would work after all the hard work. So, I left it in my garage and worked on other staves.

Recently I have a lot of time staying at home, so I asked myself why not give it a try? If the hollow limb design doesn’t work, it’s ok too, it’s just part of the bow making journey. How would I learn without some failures? The natural gull wing style, all the knot holes, the high crown and hollow limb design makes it a challenge to tiller. But the end result worked out well. The hard work is worth it! As I imagined, it was indeed a lot of work, but this valuable experience convinced me to make more of this design in the future because it’s so satisfying looking at the finished product.

Personally, I’m not a big fun of a cut in shelf, but this guy in the picture only knows how to shoot a bow this way, haha. The glued on African black wood handle gives it a decent look which I really like.

62 inches NTN
#40@28
14strands D97
Enjoy the bow!

1 by Ye  Li, on Flickr

6 by Ye  Li, on Flickr

5 by Ye  Li, on Flickr

30 by Ye  Li, on Flickr

28 by Ye  Li, on Flickr

26 by Ye  Li, on Flickr

29 by Ye  Li, on Flickr

23 by Ye  Li, on Flickr

22 by Ye  Li, on Flickr

21 by Ye  Li, on Flickr

16 by Ye  Li, on Flickr

15 by Ye  Li, on Flickr

12 by Ye  Li, on Flickr

9 by Ye  Li, on Flickr

2 by Ye  Li, on Flickr

3 by Ye  Li, on Flickr

Wildpeace Archery.

Offline paulsemp

  • Member
  • Posts: 1,918
Re: Osage Orange gull wing hollow design 40#@28''
« Reply #1 on: April 30, 2020, 09:04:16 pm »
wow

Offline osage outlaw

  • Member
  • Posts: 11,951
Re: Osage Orange gull wing hollow design 40#@28''
« Reply #2 on: April 30, 2020, 09:10:04 pm »
Very cool bow Li!
I started out with nothin' and I still got most of it left

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,461
Re: Osage Orange gull wing hollow design 40#@28''
« Reply #3 on: April 30, 2020, 09:26:29 pm »
That's as much sculpture as it is a beautiful bow. Very well done!!!   8)
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Sagebrush

  • Member
  • Posts: 151
Re: Osage Orange gull wing hollow design 40#@28''
« Reply #4 on: April 30, 2020, 10:32:42 pm »
I don't know why I like gull wings so much. They have always shot great for me even though the physics hint that they shouldn't.  Be proud of that one sir!!!  You have a keen eye.

Offline HH~

  • Member
  • Posts: 1,742
Re: Osage Orange gull wing hollow design 40#@28''
« Reply #5 on: May 01, 2020, 06:09:56 am »
Holy Crap

Another one outta the park! You should start a Bow gallery for your photo's and bows!

14 strand D97. . . Howd you know my very recipe for whitetail huntin with SB?

HH~
MAFA: Makin America Free Again

Long is the road, Hard is the way.

Mother Gue never raised such a foolish child. . . .

Readily will I display the intestinal fortitude required to fight onto the Ranger objective and complete the mission though I be the lone survivor. RLTW

Offline smoke

  • Member
  • Posts: 270
Re: Osage Orange gull wing hollow design 40#@28''
« Reply #6 on: May 01, 2020, 06:38:14 am »
Very cool and extraordinary workmanship!  Well done!

Offline Eric Krewson

  • Member
  • Posts: 5,305
Re: Osage Orange gull wing hollow design 40#@28''
« Reply #7 on: May 01, 2020, 08:04:37 am »
Masterful!

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Osage Orange gull wing hollow design 40#@28''
« Reply #8 on: May 01, 2020, 09:42:48 am »
More sweet outstanding work from you Li.Paitence is a virtue and you've got it.
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline rps3

  • Member
  • Posts: 1,514
Re: Osage Orange gull wing hollow design 40#@28''
« Reply #9 on: May 01, 2020, 10:09:40 am »
Paul beat me. WOW!


Offline DC

  • Member
  • Posts: 10,396
Re: Osage Orange gull wing hollow design 40#@28''
« Reply #10 on: May 01, 2020, 10:16:37 am »
Wow x 3

Offline Yew Bow

  • Member
  • Posts: 1
Re: Osage Orange gull wing hollow design 40#@28''
« Reply #11 on: May 01, 2020, 10:51:50 am »
Wow, amazing bow If I had that kind of knots on my stave, It would have broke no question.

Offline Aaron H

  • Member
  • Posts: 3,437
Re: Osage Orange gull wing hollow design 40#@28''
« Reply #12 on: May 01, 2020, 10:57:51 am »
Excellent craftsmanship

Offline Hans H

  • Member
  • Posts: 420
Re: Osage Orange gull wing hollow design 40#@28''
« Reply #13 on: May 01, 2020, 12:11:54 pm »
+1, very nice
Hans
Hans,      Bavaria, Germany

Offline hoosierf

  • Member
  • Posts: 492
Re: Osage Orange gull wing hollow design 40#@28''
« Reply #14 on: May 01, 2020, 01:12:31 pm »
Beautiful work!  Well done.