Author Topic: Bamboo backed bow making  (Read 1433 times)

0 Members and 1 Guest are viewing this topic.

Offline Jacob1

  • Member
  • Posts: 67
Bamboo backed bow making
« on: November 25, 2021, 01:46:08 pm »
I got some bamboo for backing and some ipe for the belly but also have some red oak that I’m making into a bow could I combine all three the bamboo oak and ipe because the ipe is a little thin only 3/4 inch  and I don’t know if it would come out the draw weight I wanted

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,630
Re: Bamboo backed bow making
« Reply #1 on: November 25, 2021, 03:59:05 pm »
You could build a 200# hickory backed ipe with a 3/4" thick ipe board...without the red oak.  Make a 66", 1 3/8" at the fades, out about 6" and taper it to 1/2" tips(for now). Use part of the remainder of the ipe for the handle riser and add about 3" to 4" of reflex at glue up.
 I would start tapering and tillering the ipe before adding the hickory backing so the ipe has a smooth reflex bend in the bow.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Jacob1

  • Member
  • Posts: 67
Re: Bamboo backed bow making
« Reply #2 on: November 25, 2021, 04:24:50 pm »
Wow I guess I greatly underestimated the strength of ipe

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,630
Re: Bamboo backed bow making
« Reply #3 on: November 25, 2021, 09:14:42 pm »
With a 1/8" backing the ipe will probably turn out to be 1/4" or so. Using the full 3/4" board you will be able to get the plain of the belly below the handle securing it won't pop off.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Jacob1

  • Member
  • Posts: 67
Re: Bamboo backed bow making
« Reply #4 on: November 25, 2021, 10:04:25 pm »
I have a big unplaned  bamboo strip that is about 2 inches wide so would it be possible to just split it in half and make two 3/4 wide bows?

Offline PatM

  • Member
  • Posts: 6,737
Re: Bamboo backed bow making
« Reply #5 on: November 26, 2021, 12:55:24 am »
It can be done.

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Bamboo backed bow making
« Reply #6 on: November 26, 2021, 08:08:28 am »
In this case it's best not to be greedy.  A 3/4" wide hunting draw weight bow can be tricky to tiller
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

bownarra

  • Guest
Re: Bamboo backed bow making
« Reply #7 on: November 26, 2021, 08:59:15 am »
Forget the tri-lam to begin with. Make yourself a simple dual lam bow. You will then have a working bow to copy. The core on a tri-lam flatbow would need to be thin or tapered at about 0.003" per running inch or else you could easily find yourself running out of belly!
You don't say what style of bow you are looking to make? Flatbow of some sort or a bendy handle bow?
3/4" wide is asking for trouble!
I make my boo backed ipe elbs 1" wide at the handle.

Offline Jacob1

  • Member
  • Posts: 67
Re: Bamboo backed bow making
« Reply #8 on: November 26, 2021, 09:11:38 am »
I was looking to make a English longbow of about 60-80 pound draw weight