« previous next »
Pages: [1]

Author Topic: Pottery problems  (Read 1111 times)

0 Members and 1 Guest are viewing this topic.

Offline sleek

  • Member
  • Posts: 6,680
Pottery problems
« on: July 04, 2022, 01:17:37 pm »
Anyone here make their own clay works? I'm new to it and just playing really. I processed my own clay and made a small pot last night. I set it to dry and it cracked on the bottom. What causes this?
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline Yooper Bowyer

  • Member
  • Posts: 1,114
  • formerly Tradcraftsman
Re: Pottery problems
« Reply #1 on: July 04, 2022, 04:43:16 pm »
I did pottery for several years, even on a small commercial scale.

The clay cracks when it does not dry evenly enough.  As the clay dries, it shrinks.  If it does not all shrink together, the piece pulls itself apart.  This means if the exterior dries much faster than the interior, or if different sections dry at different rates, (think thick bottom and thin walls) it can definitely crack.  Also, impurities can disrupt uniform drying as well.

Photos would definitely help.
Logged

Offline White Falcon

  • Member
  • Posts: 236
Re: Pottery problems
« Reply #2 on: July 07, 2022, 12:01:45 pm »
I would put a very damp paper towel over it.
Logged
Pages: [1]
« previous next »