Author Topic: How do y’all carve an HLD?  (Read 769 times)

0 Members and 1 Guest are viewing this topic.

Offline Stickhead

  • Administrator
  • Member
  • Posts: 938
How do y’all carve an HLD?
« on: March 18, 2023, 08:59:04 pm »
I’ve got a high-crowned stave, and I’m thinking HLD.  Do I need a goose neck file?  Something else?

Offline Aksel

  • Member
  • Posts: 238
Re: How do y’all carve an HLD?
« Reply #1 on: March 19, 2023, 04:55:18 am »
Hi, I did one from yew and I used a goose neck scraper and sandpaper to hollow it out. It wasn´t very extreme HLD but still it took its time. It was slow to work only with a scraper but that helped me not mess it up, but still very doable with soft yew wood. I used my fingers for calipers. Maybe you want a spoon or hook shaped chisel if you´re doing  harder wood than yew. Good luck
« Last Edit: March 19, 2023, 08:00:51 am by Aksel »
Stoneagebows

Offline simk

  • Member
  • Posts: 1,146
Re: How do y’all carve an HLD?
« Reply #2 on: March 19, 2023, 02:05:03 pm »
To speed things up I start with the gouge, then gooseneck scraper and sanding paper. Thickness taper visually can easylie monitored by the rings...and of course fingers. Looking forward to your pics.  :)
--- the queen rules ----

Offline Stickhead

  • Administrator
  • Member
  • Posts: 938
Re: How do y’all carve an HLD?
« Reply #3 on: March 19, 2023, 05:44:18 pm »
Okay, thanks, guys!

Offline Weylin

  • Member
  • Posts: 2,296
Re: How do y’all carve an HLD?
« Reply #4 on: March 21, 2023, 03:07:15 pm »
To speed things up I start with the gouge, then gooseneck scraper and sanding paper. Thickness taper visually can easylie monitored by the rings...and of course fingers. Looking forward to your pics.  :)

This is exactly what I do as well