Using tung oil as an arrow finish

[k9hiker]

Hi all

How well does tung oil work for finishing arrows? My preliminary tests look pretty promising for putting fletching on with duco cement and fletch tite. Is there anything I need to watch for?

I think my main concern was whether the fletching would actually stick well on a tung oil finished wood shaft.

[stuckinthemud]

I can’t speak for those products but tung oil is damaged and marked by water, and most adhesives tend to stick poorly to any form of oil residue .  I suggest sticking a fletching onto an oiled arrow off-cut  and seeing how you go.