« previous next »
Pages: [1]

Author Topic: Milling questions - sawing blanks  (Read 2549 times)

0 Members and 1 Guest are viewing this topic.

Offline ravenbeak

  • Member
  • Posts: 333
  • Pacific Yew Wood
    • Ravenbeak Natureworks
Milling questions - sawing blanks
« on: September 26, 2008, 12:15:20 am »
So,

I've got some big yew planks to mill up,  they are 3" thick slabs,  cut straight through the tree.  So to be quarter sawn,  they will be 3 inches wide,  but how thick do you think I should get them milled.  This will be the back to belly dimension,  I am thinking 2.25 inches,   how does this sound. 

input is appreciated

Jamie
Logged
Custom Yew Bows,  and bow making workshops
www.ravenbeak.com

Offline adb

  • Member
  • Posts: 5,339
Re: Milling questions - sawing blanks
« Reply #1 on: September 26, 2008, 12:19:58 am »
Sounds good to me. Wanna trade some?
Logged

Offline ravenbeak

  • Member
  • Posts: 333
  • Pacific Yew Wood
    • Ravenbeak Natureworks
Re: Milling questions - sawing blanks
« Reply #2 on: September 26, 2008, 12:21:05 am »
of course,

I'm thinking of the grand warbow challenge.  I'm hoping to get 15 staves

Logged
Custom Yew Bows,  and bow making workshops
www.ravenbeak.com

Offline adb

  • Member
  • Posts: 5,339
Re: Milling questions - sawing blanks
« Reply #3 on: September 26, 2008, 02:22:03 am »
Ooooh goody! Can I get one or two? I really want to try a maple or ash backed yew war bow. The one Marc St Louis made (which won BOM) is awesome! Let me know when you have some boards milled, and we can do a trade. Thanks!
Logged
Pages: [1]
« previous next »