Author Topic: Yew Heartwood - silk backed  (Read 6956 times)

0 Members and 1 Guest are viewing this topic.

Offline ravenbeak

  • Member
  • Posts: 333
  • Pacific Yew Wood
    • Ravenbeak Natureworks
Yew Heartwood - silk backed
« on: September 29, 2008, 12:34:10 am »
I named this one silkie.     30 pounds at 27 inches.  Nice and light for the shoulder rehab.  61 inches nock to nock.

This was the inside of a piggy back stave,  from a great big blown down i found awhile back.  This is also the same wood as adb's yew self bow a week or so ago ( a beauty i might add)

When the stave was split it pulled a splinter deep on what would be the back of the bow and another splinter pulling in towards the handle.  The stave was set aside in the burn pile for quite some time before I pulled it out,  and said what the heck.  I'm at that stage in my bowyers learning cycle where I almost try to make the mistakes so as to learn the lessons.  This is my first all heartwood yew bow and my first silk backing.  Also first bow with a built in arrow rest.

I didn't use a tape measure laying this one out,  and now that it's done it's interested to look at it and analyze.   The arrow rest is half in above centre,  but the interested part is that the handle,  yes,  a bit too big,  extends down into the lower limb.  So the bending area of the lower limb is a couple inches shorter than the upper.   During the tillering the bottom limb was stiff,  bottom limb stiff,  bottom limb stiff,  wow,  bottom over bending.  I took a bit off the top and called it done.

Pardon some of the pics were taken before the tru-oil was applied to the sides and belly,  also.

I was most impressed,  this bow has taken the least set of any to date,  I'm not sure if it's the silk or the tillering,  but it feels good.

Jamie





[attachment deleted by admin]
Custom Yew Bows,  and bow making workshops
www.ravenbeak.com

Offline adb

  • Member
  • Posts: 5,339
Re: Yew Heartwood - silk backed
« Reply #1 on: September 29, 2008, 11:55:59 am »
Hey, Jamie

Nice job!! I guess with these two latest bows you've made, it answers the question  if you can make an all heartwood yew bow!!

Offline OldBow

  • Member
  • Posts: 2,216
  • I'm just an old retired biology teacher.
Re: Yew Heartwood - silk backed
« Reply #2 on: September 29, 2008, 12:06:38 pm »
Neat bow and bookmarked for Sept Self BOM, too.  Thanks for the post.
When you're retired, every day is Saturday

Bowbound

  • Guest
Re: Yew Heartwood - silk backed
« Reply #3 on: September 29, 2008, 03:05:09 pm »
How does this one compare to the other one, the unbacked one.

Offline cracker

  • Member
  • Posts: 3,123
Re: Yew Heartwood - silk backed
« Reply #4 on: September 29, 2008, 04:58:30 pm »
OK I'm satisfied go ahead and send it to me at .............
Seriously nice lookin bow sir.Ronnie
If we can't help each other what is the point of being here?

Offline ravenbeak

  • Member
  • Posts: 333
  • Pacific Yew Wood
    • Ravenbeak Natureworks
Re: Yew Heartwood - silk backed
« Reply #5 on: September 30, 2008, 02:03:41 am »
thanks guys,

Limey josh,  as compared to the unbacked,  it took less set but is also less stressed.   I really like the silk and will definitely do it again,  actually have one on the go. 
I personally like the unbacked philosophy as a self bow is a hunk of wood,  no riser handles,  no tip over lays,  just a chunk of wood

jamie
Custom Yew Bows,  and bow making workshops
www.ravenbeak.com

Offline stickbender

  • Member
  • Posts: 3,828
Re: Yew Heartwood - silk backed
« Reply #6 on: September 30, 2008, 03:11:32 am »

     Both bows are very nice!  But edjamucate me a bit on the term, " Piggy back stave ".

                                                    Wayne

Offline ravenbeak

  • Member
  • Posts: 333
  • Pacific Yew Wood
    • Ravenbeak Natureworks
Re: Yew Heartwood - silk backed
« Reply #7 on: October 01, 2008, 01:28:20 am »
I'm not sure if it's real or if I made it up.  But I consider a piggy back stave to be....  when looking on end grain if the tree is split into eighths like a pie.  now take one of the slices and split it midpoint outside of tree to centre of tree,  making sure each piece is atleast 1.5 - 2 inches thick.  so,  the inner stave was essentially piggybacking the outter.  or said differently,  the back of the inner stave is one growth year earlier than the belly of the outter stave.   confused?


Jamie
Custom Yew Bows,  and bow making workshops
www.ravenbeak.com

Offline stickbender

  • Member
  • Posts: 3,828
Re: Yew Heartwood - silk backed
« Reply #8 on: October 01, 2008, 04:03:29 am »

     Welllllll, uh, I think I kinda get it.  If you mean that you take a stave, and split in half between the bark side, and the heart side......otherwise, yepher, I'm confused.

                                                                        Wayne

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 31,712
  • if you have to ask you wouldn't understand ,Tenn.
Re: Yew Heartwood - silk backed
« Reply #9 on: October 01, 2008, 05:26:53 am »
Nice job Jamie,well done. :)
   Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline ravenbeak

  • Member
  • Posts: 333
  • Pacific Yew Wood
    • Ravenbeak Natureworks
Re: Yew Heartwood - silk backed
« Reply #10 on: October 01, 2008, 12:34:18 pm »
that's right stickbender,  it takes a big tree to get piggy back staves
Custom Yew Bows,  and bow making workshops
www.ravenbeak.com

Offline stickbender

  • Member
  • Posts: 3,828
Re: Yew Heartwood - silk backed
« Reply #11 on: October 01, 2008, 03:48:53 pm »

     Yeah, I guess it would take a pretty big tree to do that.  thanks, and again, very nice bows.

                                                                    Wayne

Offline ravenbeak

  • Member
  • Posts: 333
  • Pacific Yew Wood
    • Ravenbeak Natureworks
Re: Yew Heartwood - silk backed
« Reply #12 on: October 01, 2008, 04:16:07 pm »
this particular tree was approx 350 years old
Custom Yew Bows,  and bow making workshops
www.ravenbeak.com

Offline stickbender

  • Member
  • Posts: 3,828
Re: Yew Heartwood - silk backed
« Reply #13 on: October 01, 2008, 04:44:45 pm »

     What?  350 years old and you cut it down?!!  I'm calling "Granola Central " in California !!  Man, how did you manuver it to cut it in sections?  And what did you use to cut it in sections?

                                                                     Wayne

Offline ravenbeak

  • Member
  • Posts: 333
  • Pacific Yew Wood
    • Ravenbeak Natureworks
Re: Yew Heartwood - silk backed
« Reply #14 on: October 01, 2008, 06:30:11 pm »
the tree was a blown down,  i'd never have the heart to cut down a live yew tree.   It was growing in a section of old growth surrounded by thousand year old firs and cedars.

I cut it into 6 foot sections 4 of them,  with a little handsaw and carried them out with a buddy.   The bottom section we could barely lift.   I split up the 4 sections and got about 25 staves.
Custom Yew Bows,  and bow making workshops
www.ravenbeak.com