« previous next »
Pages: [1]

Author Topic: Where to find 3/8 Heads  (Read 3053 times)

0 Members and 1 Guest are viewing this topic.

vCo2v

  • Guest
Where to find 3/8 Heads
« on: November 20, 2008, 11:28:33 am »
Where do you guys find heads for 3/8 arrows? The only place I can seem to find bodkins and/or field points at reasonable prices are on ebay UK.

I live in WA, USA There doesn't seem to be anyone selling 3/8 heads?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,494
Re: Where to find 3/8 Heads
« Reply #1 on: November 20, 2008, 12:04:25 pm »
You may need to taper the forward end of your shafts to accept the available heads. On my sourwood shoot shafts(and some canes) the shaft behind the point is a larger diameter than the points but they shoot fine and it actually makes it easier to remove from a target.   Pat
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

vCo2v

  • Guest
Re: Where to find 3/8 Heads
« Reply #2 on: November 20, 2008, 01:22:08 pm »
Thank you for the tip. That seems like the only viable option.
Logged

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: Where to find 3/8 Heads
« Reply #3 on: November 21, 2008, 10:30:07 am »
I've never found a source for 3/8" points, so I do like Pat-get 23/64" points and taper the front couple inches of the shaft.
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Arthur Herrmann

  • Guest
Re: Where to find 3/8 Heads
« Reply #4 on: November 23, 2008, 05:34:48 pm »
I think .38 special bullet casings fit a 3/8 shaft. You might have to shave the tip a little, the pound the casing on.
Logged
Pages: [1]
« previous next »