« previous next »
Pages: [1]

Author Topic: All Wood Takedown Limbs  (Read 3618 times)

0 Members and 1 Guest are viewing this topic.

roofus

  • Guest
All Wood Takedown Limbs
« on: December 10, 2008, 08:44:49 pm »
O.k. I tried this before and I want to get some advice.
I have a good riser for a takedown bow. I want to make some ALL wood limbs for it and I would like to hit 50# @ 28"
The attachment is a drawing that I started.
Thanks for any input!

[attachment deleted by admin]
Logged

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: All Wood Takedown Limbs
« Reply #1 on: December 10, 2008, 11:20:37 pm »
I posted on the other thread but I will respond here again.  I would go with a Bamboo back Hickory core and Ipe belly.  Realistically you aren't going to put a ton of stress on the wood since the limbs are already setting in a deflex position. I think a boo back or hickory back on Ipe, Osage or many other woods will work.  Justin
Logged
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah

roofus

  • Guest
Re: All Wood Takedown Limbs
« Reply #2 on: December 11, 2008, 07:56:46 pm »
Thnaks for the info! I really respect the information everyone has on this forum.

Rob
Logged

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,888
  • Eddie Parker
Re: All Wood Takedown Limbs
« Reply #3 on: December 11, 2008, 11:04:39 pm »
 If you don't go with a Lamination, I'd use an Osage limb, with about 3 courses of sinew. But if you use lam's i'd make the limbs about 2" wide at the mounts and most of the way down the limb.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

roofus

  • Guest
Re: All Wood Takedown Limbs
« Reply #4 on: December 12, 2008, 12:13:35 pm »
Thanks.
Logged
Pages: [1]
« previous next »