« previous next »
Pages: [1]

Author Topic: knaping slabs  (Read 5236 times)

0 Members and 1 Guest are viewing this topic.

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,888
  • Eddie Parker
knaping slabs
« on: January 01, 2009, 04:51:59 pm »
  See if this helps any. The first picture shows a well ground edge.Next I run a series of short flakes and then grind them down. This starts making it Ovate.Grind the edge again, and then run another set of flakes on top of the first set. But push harder this time.Then repeat the same procedure on the other edge and the flakes meet up inthe middle

[attachment deleted by admin]
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,888
  • Eddie Parker
Re: knaping slabs
« Reply #1 on: January 01, 2009, 04:55:15 pm »
Don't know what is wrong but here are the other ones

[attachment deleted by admin]
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline david w.

  • Member
  • Posts: 1,823
Re: knaping slabs
« Reply #2 on: January 01, 2009, 06:30:54 pm »
thanks Mullet this did help alot :) 
I am having trouble with hinging on my last couple points but now I see i do it totally wrong.
Logged
These pretzels are making me thirsty.

if it dont go fast...chrome it - El Destructo

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,888
  • Eddie Parker
Re: knaping slabs
« Reply #3 on: January 01, 2009, 06:47:58 pm »
 Sorry about the pictures, I think I took about 30 because of the bright sun and the glare.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

brian melton

  • Guest
Re: knaping slabs
« Reply #4 on: January 02, 2009, 12:45:57 am »
Eddie,

             So you don't alternate flake???
Logged

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,888
  • Eddie Parker
Re: knaping slabs
« Reply #5 on: January 02, 2009, 08:08:49 am »
  Brian,  not sure what you mean.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Otoe Bow

  • Member
  • Posts: 898
  • Mike Chase, Afghanistan
Re: knaping slabs
« Reply #6 on: January 02, 2009, 01:37:06 pm »
Eddie:  That helped me.  I've always had a hard time starting any material with a "square" edge, be it glass, obsidian, or Johnstone.  Does the flat pressure flaker help too?

Thanks for sharing. 

Mike
Logged
So far, I haven't found any Osage or knappable rock over here.  Embrace the suck

Offline Blacktail

  • Member
  • Posts: 1,432
Re: knaping slabs
« Reply #7 on: January 02, 2009, 04:53:24 pm »
i see eddie.thanks for all the work you did...when i get some time i will try it out...later john
Logged

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,888
  • Eddie Parker
Re: knaping slabs
« Reply #8 on: January 02, 2009, 06:35:45 pm »
 Mike, the flat flaker helps me run wider flakes.I just take a hammer and flatten the tip and then clean it up with a file. If I want to run thinner flakes I just turn it on edge and do the same starting notches. I have pointed ones but tend to use the flat one more.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline redwasp

  • Member
  • Posts: 222
Re: knaping slabs
« Reply #9 on: January 09, 2009, 07:50:48 pm »
Is the rubber you used available to public i have worn out a few that i made and would like to find a more durable material.
Logged
If one man can do it, another man can do it. Richard......Northeastern PA.

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,888
  • Eddie Parker
Re: knaping slabs
« Reply #10 on: January 09, 2009, 08:32:46 pm »
 Redwasp, not that I know of. I found it in our lab at work and comodeered it. I cut the slots and glued it to the wood.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline nugget

  • Member
  • Posts: 1,995
  • I see, I hunt, I shoot, I eat
Re: knaping slabs
« Reply #11 on: January 09, 2009, 08:36:28 pm »
Very cool . thanks
Logged
Life is not a journey to the grave with the intentions of arriving safely in a pretty and well preserved body. But rather to slide in sideways, thoroughly used up, totally worn out and loudly proclaiming....WOW WHAT A RIDE!!
Pages: [1]
« previous next »