Wood I got from Brian Melton a couple years ago.  Edge grain.  65" ntn, 67#/28".  1&13/16" wide out past mid limb, to 3/8 tips at nock.  Guatemalan mahogany handle.  8" between handle fades.   Board was touch under 1" and I have a nice backing strip ripped off too.  Piece was 11/16 thick at start.  Brown osage tip overlays.   Heated in 2" reflex, and it has about 1/2" set after very little shooting.  A ripper.   Maple stained with a coat of colonial maple and a coat of red mahogany, then urethane.   I had it just about full tillered at 80# and brought it down by some narrowing and belt sanding.  Impressive wood.  Less than 1/2" thick at fades.   I am still pondering handle covering.
Dave
[attachment deleted by admin]