Main Discussion Area > Arrows

Arrow shafts

<< < (2/4) > >>

ken75:
lee valley tools , 3/8 dowel cutter with extra blade is about a 25.00 investment , reduce 1/2 by 1/2 by 33in and drive through the dowel cutter with a drill  motor

ZanderPommo:
+1 to that

I had one but never used it so I traded it off, I never used it because I started using tonkin cane, which is way more difficult to work, but is cheap and if done right makes great arrows

aero86:
yes, tonkin cane,  yes!

ZanderPommo:
hey aero make sure to tell me if them cane sticks goin your way don't arrive by next friday ;)

Swamp Bow:
If you just gotta try it (like I never do that ::) ) I would recommend at least one ballbearing steady if not two.  I would also NOT suggest a  high speed once you get thin, one for safety, two it is easier to set up a catastrophic harmonic vibration at higher speed.  Frankly I would stick to tools built for the process.  Please be carefull.

Swamp

Navigation

[0] Message Index

[#] Next page

[*] Previous page