« previous next »
Pages: [1]

Author Topic: spine tester chart  (Read 5255 times)

0 Members and 1 Guest are viewing this topic.

Offline luke the drifter

  • Member
  • Posts: 171
spine tester chart
« on: March 09, 2010, 08:55:23 pm »
hello all,

i have a general idea about how to build a homemade spine tester.  i am not wanting to use the dial calipar design but the other one(protractor style).  is there a standard chart  to go buy?  how do i mark my spots on the tester for a particular arrow spine?  i hope these questions make sense.
Logged

Offline CraigMBeckett

  • Member
  • Posts: 398
Re: spine tester chart
« Reply #1 on: March 10, 2010, 05:52:23 am »
Luke,

Try 2Jays spine tester it comes complete with scale.

http://www.bowyers-den.com/index.php?q=node/135

AMO spine is calculated as follows

26/(inches of Deflection) = Lbs Spine

Craig.
Logged

Offline luke the drifter

  • Member
  • Posts: 171
Re: spine tester chart
« Reply #2 on: March 10, 2010, 08:53:39 am »
thanks.  it is very helpful.
Logged

Offline Canoe

  • Member
  • Posts: 238
  • Progress - Not Perfection
Re: spine tester chart
« Reply #3 on: March 10, 2010, 12:11:06 pm »
Howdy L. Drifter,

Here is a link to the spine tester I built.  (It was easy ;))

This link has a downloadable, printable, colorful spine tester chart...

http://www.primitivearcher.com/smf/index.php/topic,4589.0.html

Good Luck,
Canoe
Logged
"Nature is a mutable cloud which is always and never the same."  - R. W. Emerson

"Wilderness is not a luxury, but a necessity of the human spirit."    -Edward Abbey
Pages: [1]
« previous next »