Main Discussion Area > Bows

Thanks Ryan

<< < (3/11) > >>

GregB:

Dustybaer,
We'll definitely be using a bow stringer getting it to brace. Hopefullly I'll be the only redneck required for that, but who knows? ;D

I'm hoping Ryan or whoever with experience will get in on this string and give us some good advice! ;)

NOMADIC PIRATE:
Yep Ryan is the master at those curves.

can't wait to see what you get out of this one Pappy ;)

Ryano:
LoL.... :-[  :D Your welcome guys but dont thank me yet, thank me when you got a shooter out it! 

tom sawyer:
Thats how all my bows look.  But they are facing the other direction.

Will be interested to see this bow demo-tillered.

Ryano:
I was just looking at your pictures and it looks like you already cut your handle narrow, I have found it better to leave it full width untill you get the bow tillered.  I had a problem once with one that was narrowed in the handle before tillering. I had it clamped in the vise pulling on the tip to get it to tillered to brace and the limb was to stiff and it broke right where the fade tapered into the handle. The one's you already did should be ok just be careful to get the outer part of the limb working before you pull on it to hard. Good luck! I'll be happy to help you guys if I can while I'm down there. ;D

Navigation

[0] Message Index

[#] Next page

[*] Previous page