Main Discussion Area > Bows

Thanks Ryan

<< < (4/11) > >>

Ryano:
Tom, thats almost a exact copy of the form I use for my working curves, like the one that won bow of the month in jan. It will lose quite a bit of that reflex.. ;)

Badger:
One thing that might help you on that, I did several a few years ago, but the string will approach different angles to that recurve as it unfolds, When you first start to draw it there wont be much pressure, but as different parts of the limbs approach 90 degrees that potion of the limb will suddenly have a lot more pressure, you almost have to tiller each section at it's close to 90 degree position, or just pull on the tip by hand and get your self a little bend going that way before you actually string it. Curious to see how it comes out, they are very challenging. Steve

mullet:
  Nice curves!Can't wait to see it finished.Your steaming contraption is a neat set up,I think I'm going to copy it if you don't mind?

Marc St Louis:
That one will give you fits, trust me

Ryano:


It can be done. It will look something like this when your done.

Navigation

[0] Message Index

[#] Next page

[*] Previous page