Author Topic: best so far lifted a splinter -- update " patched"  (Read 20944 times)

0 Members and 1 Guest are viewing this topic.

Offline John K

  • Member
  • Posts: 1,936
Re: My best so far POPPED A SPLINTER
« Reply #30 on: July 23, 2010, 03:56:59 pm »
Bummer ! It looked nice Jesse, good luck at the State shoot !!
The only way to fail is to never start !

Offline NTD

  • Member
  • Posts: 1,771
Re: My best so far POPPED A SPLINTER
« Reply #31 on: July 23, 2010, 05:38:05 pm »
And just when I thought I'd give boo a chance again, you've convinced me to stick with hickory for awhile....

Sorry bout that Jesse, Hope you find another half for it.
Nate Danforth

Offline Jesse

  • Member
  • Posts: 2,129
Re: best so far lifted a splinter -- update " patched"
« Reply #32 on: July 28, 2010, 09:14:40 pm »
Well I just couldn't give up on this one that easy so I tried my hand at a patch job. I have seen wraps fail so I decided to use a splint as well. I sanded the splintered area and glued down the splinter with tite bond instant CA. I then thinned a piece of boo really thin and glued it over the area going beyond into the unaffected part. I then wrapped it with a rubber clamp to let it cure for a few minuets. Then I took the straps off and wrapped it with braided fishing line "I know not primitive but its what I had"  Finally I soaked in some super glue over the top and sealed it. It did change the tiller a bit and it took 1/8" more set. Still shoots fast and hard though. I was a bit nervous shooting it the first few times but after a few hundred shots I managed to get the courage to hold it full draw long enough for the self timer to take a picture ;D Not pretty but hey its a working bow again.
« Last Edit: July 28, 2010, 09:17:42 pm by Jesse »
"If you can find a path with no obstacles, it probably doesn't lead anywhere."
    --Frank A. Clark

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,888
  • Eddie Parker
Re: best so far lifted a splinter -- update " patched"
« Reply #33 on: July 28, 2010, 09:23:01 pm »
 Nice, clean looking patch, Jesse. I'm fixing one right now that did the same. Except I'm scraping the rind off and sinew backing it. When I'm done I'll cover it with a long Bull snake skin.
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Jesse

  • Member
  • Posts: 2,129
Re: best so far lifted a splinter -- update " patched"
« Reply #34 on: July 28, 2010, 09:29:24 pm »
Nice, clean looking patch, Jesse. I'm fixing one right now that did the same. Except I'm scraping the rind off and sinew backing it. When I'm done I'll cover it with a long Bull snake skin.
Thanks Eddie. I think the sinew will work great. I was considering it but I didnt have the materials. Make sure you post it when its done
"If you can find a path with no obstacles, it probably doesn't lead anywhere."
    --Frank A. Clark

Offline youngbowyer33

  • Member
  • Posts: 606
Re: best so far lifted a splinter -- update " patched"
« Reply #35 on: July 28, 2010, 09:59:47 pm »
good save
"All we have to decide is what to do with the time that is given to us"

Offline JW_Halverson

  • Member
  • Posts: 11,866
Re: best so far lifted a splinter -- update " patched"
« Reply #36 on: July 28, 2010, 10:46:29 pm »
Can't let a bow that nice slip away into the long dark night.

Good work.
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Jesse

  • Member
  • Posts: 2,129
Re: best so far lifted a splinter -- update " patched"
« Reply #37 on: July 29, 2010, 12:01:39 am »
Thanks youngbowyer and JW :) One good thing is now I might actually hang on to this one. Cant give someone a patched bow :)
"If you can find a path with no obstacles, it probably doesn't lead anywhere."
    --Frank A. Clark

Offline Gordon

  • Member
  • Posts: 3,299
Re: best so far lifted a splinter -- update " patched"
« Reply #38 on: July 29, 2010, 12:33:09 am »
Good save. I expect that patch job will hold.
Gordon

Offline Josh

  • Member
  • Posts: 3,367
  • Silence is golden but duct tape is silver.
Re: best so far lifted a splinter -- update " patched"
« Reply #39 on: July 29, 2010, 12:41:11 am »
Nice!!!!!!  Glad you saved it.... The powers that be just wanted you to hold on to this one.  ;D  ...Im puttin it back into BOM if'n ya don't mind.   :)
“The trouble with quotes on the Internet is you never know if they are genuine.” —Abraham Lincoln

Offline osage outlaw

  • Member
  • Posts: 11,952
Re: best so far lifted a splinter -- update " patched"
« Reply #40 on: July 29, 2010, 12:52:19 am »
I think you should wrap the other limb in the same spot so it would be symmetrical.  It would look like it was designed that way and not patched.
I started out with nothin' and I still got most of it left

Offline Josh

  • Member
  • Posts: 3,367
  • Silence is golden but duct tape is silver.
Re: best so far lifted a splinter -- update " patched"
« Reply #41 on: July 29, 2010, 12:58:35 am »
personally I would leave the other limb alone. Be proud of your patch... It shows how much you loved your bow because instead of giving up and retiring it you took the time to repair it and keep it shooting.  It is like a badge of honor or a cool battle scar... I like it.  :)
“The trouble with quotes on the Internet is you never know if they are genuine.” —Abraham Lincoln

Offline Sanford

  • Member
  • Posts: 36
Re: best so far lifted a splinter -- update " patched"
« Reply #42 on: July 29, 2010, 01:29:56 am »
Hey good save! I actually have the same problem right now, though my splinter is about twice as long, but i am still going to see if i can get it fixed. I will probably use that tite bond CA, as i couldn't decide was would be best, but i think that seems like a good choice.
I am the captain of my fate, I am the master of my soul...

Offline medicinewheel

  • Member
  • Posts: 3,618
Re: best so far lifted a splinter -- update " patched"
« Reply #43 on: July 29, 2010, 01:40:00 am »
personally I would leave the other limb alone. Be proud of your patch... It shows how much you loved your bow because instead of giving up and retiring it you took the time to repair it and keep it shooting.  It is like a badge of honor or a cool battle scar... I like it.  :)

Exactly! The first real shooter I ever made is still going strong with a patch like that on one limb...
Frank from Germany...

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 31,819
  • if you have to ask you wouldn't understand ,Tenn.
Re: best so far lifted a splinter -- update " patched"
« Reply #44 on: July 29, 2010, 06:45:35 am »
Nice save Jesse,looks like that should do the trick. :) :)
   Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good