Author Topic: New Hophornbeam Bow  (Read 15235 times)

0 Members and 1 Guest are viewing this topic.

Offline Josh

  • Member
  • Posts: 3,367
  • Silence is golden but duct tape is silver.
Re: New Hophornbeam Bow
« Reply #30 on: August 05, 2010, 04:10:25 pm »
Cool Tbod.. Should be just fine if not better. If I were repairing a chrysal that was in the mid-limb area,  I would dish out the bad area and plug it with a sound piece of wood.   :)  Post pics of it when you get it finished, I wanna see what it looks like.  Good luck on yours!  :)
“The trouble with quotes on the Internet is you never know if they are genuine.” —Abraham Lincoln

Offline TBod

  • Member
  • Posts: 275
Re: New Hophornbeam Bow
« Reply #31 on: August 05, 2010, 06:32:57 pm »
Alright pic coming tomorrow.

Was thinking a little.. The problem with your patch IMO is it might crack horizontally at the bottom of the first crack.

Se the pic I drew a theoretical first crack black and the other that might occur with red.

I'm just thinking outloud in theory..overthinking..


[attachment deleted by admin]

Offline Josh

  • Member
  • Posts: 3,367
  • Silence is golden but duct tape is silver.
Re: New Hophornbeam Bow
« Reply #32 on: August 05, 2010, 06:40:32 pm »
It's not going anywhere, trust me.  The patch is thick so that area doesn't bend so there's no chance of it moving or splitting longitudinally like you drew.   And besides, have you ever tried to split a piece of Hophornbeam?  this stuff doesn't want to separate even when you try to force it with a wedge...  If I were to continue bending the bow towards the back without the patch I think that could happen but bending it towards the belly as in bracing/drawing the bow i don't think it will..the back of the bow would have to do some serious stretching... I'm sorry but your theory doesn't hold much water with me.
« Last Edit: August 05, 2010, 07:10:03 pm by Josh »
“The trouble with quotes on the Internet is you never know if they are genuine.” —Abraham Lincoln

Offline medicinewheel

  • Member
  • Posts: 3,618
Re: New Hophornbeam Bow
« Reply #33 on: August 05, 2010, 09:14:04 pm »
Tiller looks good Josh!
Frank from Germany...

Offline chasing crow

  • Member
  • Posts: 269
Re: New Hophornbeam Bow
« Reply #34 on: August 05, 2010, 09:38:33 pm »
Josh,
I hope you did not take my comment wrong. I was refering to your consistant perfection!
Chasing Crow
We know more than we think we do. Pass your knowledge on to our youth

Offline Josh

  • Member
  • Posts: 3,367
  • Silence is golden but duct tape is silver.
Re: New Hophornbeam Bow
« Reply #35 on: August 05, 2010, 10:23:08 pm »
Thanks Frank!!  :)

Chasingcrow I didn't take your comment wrong, I took it as you meant it...as a compliment!  Thanks again, brother.  :)
“The trouble with quotes on the Internet is you never know if they are genuine.” —Abraham Lincoln

Offline TBod

  • Member
  • Posts: 275
Re: New Hophornbeam Bow
« Reply #36 on: August 06, 2010, 06:25:52 am »
Hey! here's the tip. I posted it here so you could easily find it. Feel free to remove it or something..

I'm ready to start tillering it now, "the moment of truth" for the save patch



[attachment deleted by admin]

Offline El Destructo

  • Member
  • Posts: 8,078
  • Longhaired Crippled Hippie Biker And Proud Of It!!
    • Desert Sportz Primitive Archery
Re: New Hophornbeam Bow
« Reply #37 on: August 06, 2010, 11:14:59 am »
Eeeeeew....I say as long as the Tip stays Static...It may have a good Chance of Surviving....if it Flexes at all....I say it's going to fail....like a built up Riser that Flexes and pops...JMO....good luck and keep Us posted
As a species we're fundamentally insane. Put more than two of us in a room, we pick sides and start dreaming up ways to kill one another.Why do you think we invented politics and religion.
Think HEALTHCARE Is Expensive Now,Wait Till It's FREE
Do Or Do Not,There Is No TRY
2024...We Will Overcome

Offline ricktrojanowski

  • Member
  • Posts: 2,064
  • Worlds Greatest Deer Repellent
Re: New Hophornbeam Bow
« Reply #38 on: August 08, 2010, 07:47:59 am »
Very nice job Josh.  Also good job on the save. 
Traverse City, MI

Offline PeteC

  • Member
  • Posts: 2,004
Re: New Hophornbeam Bow
« Reply #39 on: August 08, 2010, 08:56:42 am »
Nice job Josh.That is what self- bowyering is all about,IMHO,coping with wood.Looks great. God Bless
What you believe determines how you behave., Pete Clayton, Whitehouse ,Texas