Author Topic: some tough broadheads......050" band saw blades (added , weight and shape)  (Read 6892 times)

0 Members and 1 Guest are viewing this topic.

half eye

  • Guest
Hey fellas,
       I shot some more crude's today for larry to take to a wood show as an example.....took a photo of the ones he cut out (they resemble the ACE standard or spade shaped....these still penetrated the subfloor but were about 1/10" less than the Delta shape I posted here in the beginning.......in the photo I doctored the far right head so ya can see what I shot first.

these heads are .050" and average weight was 135.2 grains....and 126.2 after sharpening FYI (it would be easy to make the head or tang bigger to add weight without too much work.
rich

[attachment deleted by admin]

JustinNC

  • Guest
just doing a little research....just got a hold of some bandsaw blades. Was told there was more back there in the pile. I may just have to go rescue some more of them to stash away, as the "new" ones they get rid of now are sold for scrap. :(