Author Topic: My first bow made. Its a sucess!  (Read 7324 times)

0 Members and 1 Guest are viewing this topic.

Offline Ifrit617

  • Member
  • Posts: 1,596
My first bow made. Its a sucess!
« on: August 30, 2010, 02:34:32 pm »
This is the first bow that I have made.

It is linen backed maple witha red oak riser.

It pulls 40# @ 27"  And is tillered out to 28".

The bow has taken about 2" set just after shooting, and has been shot about 500 times.

Any feedback about the tiller or bow is really helpful. Thanks.

[attachment deleted by admin]

Offline Ifrit617

  • Member
  • Posts: 1,596
Re: My first bow made. Its a sucess!
« Reply #1 on: August 30, 2010, 02:35:49 pm »
One more pic....

[attachment deleted by admin]

Offline Parnell

  • Member
  • Posts: 5,551
Re: My first bow made. Its a sucess!
« Reply #2 on: August 30, 2010, 02:40:07 pm »
I'd say it's a success!  Your tiller looks great, especially it it's a first.  Only thing that crossed my mind is if you've looked into how heat treating white wood bows can help with performance.  2" of set after shooting is fine though.  Did you heat treat your bow?
1’—>1’

Offline Ifrit617

  • Member
  • Posts: 1,596
Re: My first bow made. Its a sucess!
« Reply #3 on: August 30, 2010, 02:57:15 pm »
Thanks!!! It's a smooth shooter.  I didn't heat treat.... I have heard about heat treating about it but since I'm inexperienced with this stuff I wasn't sure how to treat it.

I might research it though

Offline Steve Milbocker

  • Member
  • Posts: 447
Re: My first bow made. Its a sucess!
« Reply #4 on: August 30, 2010, 03:10:44 pm »
Nice job, it looks great!
I'm no where near as smart as my phone!

Offline Frode

  • Member
  • Posts: 400
Re: My first bow made. Its a sucess!
« Reply #5 on: August 30, 2010, 03:22:14 pm »
Great first!  Welcome to the addiction!
Frode
If it doesn't rap the lintel, it might not be a longbow.

half eye

  • Guest
Re: My first bow made. Its a sucess!
« Reply #6 on: August 30, 2010, 03:32:18 pm »
Very nicely done.
rich

Offline Mark Anderson

  • Member
  • Posts: 373
  • Mark Anderson Buckie, Scotland
Re: My first bow made. Its a sucess!
« Reply #7 on: August 30, 2010, 04:04:12 pm »
Great job! Tiller is spot on. Good job on the fades.
Mark
« Last Edit: August 30, 2010, 04:28:56 pm by commadore »
"Mommy some guys just don't know how to shoot REAL bows so they have to buy them, probably at Walmart and they have wheels on them."  Caedmon Anderson (4yrs)

Offline Del the cat

  • Member
  • Posts: 8,291
    • Derek Hutchison Native Wood Self Bows
Re: My first bow made. Its a sucess!
« Reply #8 on: August 30, 2010, 04:22:37 pm »
Excellent bow, well done.
Del
Health warning, these posts may contain traces of nut.

Offline cracker

  • Member
  • Posts: 3,123
Re: My first bow made. Its a sucess!
« Reply #9 on: August 30, 2010, 04:32:45 pm »
I like it. It doesn't get much better than that.Ron
If we can't help each other what is the point of being here?

Offline n2huntn

  • Member
  • Posts: 468
  • jeff_smith13@hotmail.com ROLL TIDE !
Re: My first bow made. Its a sucess!
« Reply #10 on: August 30, 2010, 04:39:57 pm »
Excellent. Work. You did a great job
Jeff
Genesis 27: 3

Offline Ifrit617

  • Member
  • Posts: 1,596
Re: My first bow made. Its a sucess!
« Reply #11 on: August 30, 2010, 04:51:08 pm »
Thanks everybody...

Offline profsaffel

  • Member
  • Posts: 420
Re: My first bow made. Its a sucess!
« Reply #12 on: August 30, 2010, 06:46:36 pm »
If that's your first successful bow, I'd say you're on your way to many, many more.
Professor of History, Student of Bowyery

Offline bigcountry

  • Member
  • Posts: 841
Re: My first bow made. Its a sucess!
« Reply #13 on: August 30, 2010, 07:05:51 pm »
Just amazes me to see young folks put out great bows like this.  I couldn't have done it at your age.
Westminster, MD

Offline Jesse

  • Member
  • Posts: 2,129
Re: My first bow made. Its a sucess!
« Reply #14 on: August 30, 2010, 09:14:52 pm »
tiller looks great. I think you might just be a natural. :)
"If you can find a path with no obstacles, it probably doesn't lead anywhere."
    --Frank A. Clark