« previous next »
Pages: [1] 2

Author Topic: what kind of heat gun do you use?  (Read 5450 times)

0 Members and 1 Guest are viewing this topic.

Offline blades7558

  • Member
  • Posts: 114
what kind of heat gun do you use?
« on: October 09, 2010, 07:40:45 pm »
what kind of heat gun do you use and how many watts is it? how hot does it get? just wanting to know im looking into buying one for my self
Logged
build em...break em...sigh....build em....

Lombard

  • Guest
Re: what kind of heat gun do you use?
« Reply #1 on: October 09, 2010, 08:22:08 pm »
Got the Ryobi on sale for twenty nine dollars. It has temperature adjustments from two hundred up to eleven hundred degrees. I've had it for a couple years now, and have no complaints.
Logged

Offline HoBow

  • Member
  • Posts: 1,439
  • The choices we make dictate the lives we lead.
Re: what kind of heat gun do you use?
« Reply #2 on: October 09, 2010, 08:37:26 pm »
Same as Lombard. The Ryobi has been good, but its only a few months old ;)
Logged
Jeff Utley- Atlanta GA

Offline sailordad

  • Member
  • Posts: 5,045
Re: what kind of heat gun do you use?
« Reply #3 on: October 09, 2010, 09:18:28 pm »
i have a SNAP ON TOOLS heat gun
that way  i could write it off on my tool deduction  ;)
Logged
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

Offline kerryb

  • Member
  • Posts: 315
Re: what kind of heat gun do you use?
« Reply #4 on: October 09, 2010, 10:13:52 pm »
the one harbor freight sells for ten bucks is not a bad gun , if your just using it occasionally. It has  high and low settings,plenty of heat for straightening a  bow.
Logged
Milan Mo

Offline osage outlaw

  • Member
  • Posts: 11,952
Re: what kind of heat gun do you use?
« Reply #5 on: October 09, 2010, 10:37:16 pm »
I bought the $17 wagner from wal-mart a couple of years ago.  It has 2 heat settings and has worked great.
Logged
I started out with nothin' and I still got most of it left

Offline blades7558

  • Member
  • Posts: 114
Re: what kind of heat gun do you use?
« Reply #6 on: October 09, 2010, 10:59:42 pm »
ok thanks i think the harbor freight one is the winner for me low price and i won't use it to much so its worth it
Logged
build em...break em...sigh....build em....

Offline adb

  • Member
  • Posts: 5,339
Re: what kind of heat gun do you use?
« Reply #7 on: October 10, 2010, 04:26:17 am »
I can't remember the make of mine, but it has 4 heat settings, and a hi/low fan setting. I like the versatility.
Logged

Offline Del the cat

  • Member
  • Posts: 8,291
    • Derek Hutchison Native Wood Self Bows
Re: what kind of heat gun do you use?
« Reply #8 on: October 10, 2010, 11:19:06 am »
Quote from: Lombard on October 09, 2010, 08:22:08 pm
Got the Ryobi on sale for twenty nine dollars. It has temperature adjustments from two hundred up to eleven hundred degrees. I've had it for a couple years now, and have no complaints.
What sort of temperature do you set it to for tempering? Have yopu tempered Ash?
Del
Logged
Health warning, these posts may contain traces of nut.

Offline denny

  • Member
  • Posts: 304
    • my site
Re: what kind of heat gun do you use?
« Reply #9 on: October 11, 2010, 03:38:33 pm »
Wait, I bought a Milwaukee for around 29.00  at walmart and it has served me well. I have two, the other is a Milwaukee and it cost 90.00. I also use a space heater in the winter. Denny
Logged

Offline Aries

  • Member
  • Posts: 493
Re: what kind of heat gun do you use?
« Reply #10 on: October 11, 2010, 07:05:53 pm »
my milwakee is a champion
Logged
"If the only tool you have is a hammer,
                   you tend to see every problem as a nail."
                               ~Abraham Maslow

Offline Del the cat

  • Member
  • Posts: 8,291
    • Derek Hutchison Native Wood Self Bows
Re: what kind of heat gun do you use?
« Reply #11 on: October 16, 2010, 10:10:29 am »
I've finally succumbed and bought one from Scewfix, it was on special offer £29:99 2kw with digitally adjustable heat control.
I shall have to try it on my Ash bow which went belly up.
With the digital control I should be able to make some fairly well controlled trials, as I've been a bit sceptical before.
Del
Logged
Health warning, these posts may contain traces of nut.

Offline Alpinbogen

  • Member
  • Posts: 193
Re: what kind of heat gun do you use?
« Reply #12 on: October 17, 2010, 09:04:16 am »
I've been using a Wagner for about 10 years.  It was cheap and no frills, but it has worked fine.
Logged

Offline Del the cat

  • Member
  • Posts: 8,291
    • Derek Hutchison Native Wood Self Bows
Re: what kind of heat gun do you use?
« Reply #13 on: October 18, 2010, 08:05:26 am »
Humble pie for Del.
My scepticiscm was unjustified.
I've heat treated the limb of my Ash Meare heath which went weak, I clamped it flat and slowly increased the heat settings, it started workning between 350 and 400 degrees C.
I got it light golden brown and a day later unclamped it, it's straight as a board and much stiffer than the untreated limb.
So my oppolgies to anyone I've irritated by by doubting, I now see my previous attempts had been too hot too quick with no recovery time.
Now, do I have gravy or custard on this humble pie?
Del
Logged
Health warning, these posts may contain traces of nut.

Lombard

  • Guest
Re: what kind of heat gun do you use?
« Reply #14 on: October 18, 2010, 09:37:35 am »
Quote from: Del the cat on October 10, 2010, 11:19:06 am
Quote from: Lombard on October 09, 2010, 08:22:08 pm
Got the Ryobi on sale for twenty nine dollars. It has temperature adjustments from two hundred up to eleven hundred degrees. I've had it for a couple years now, and have no complaints.
What sort of temperature do you set it to for tempering? Have yopu tempered Ash?
Del

Del, yes to tempering Ash, although other woods seem to respond better. As far as temperature on the heat gun, I run it on the highest setting. It is just a matter of keeping the gun moving to avoid scorching.
Logged
Pages: [1] 2
« previous next »