Author Topic: can you ID this wood?  (Read 2766 times)

0 Members and 1 Guest are viewing this topic.

Offline bubby

  • Member
  • Posts: 11,054
can you ID this wood?
« on: March 22, 2011, 08:25:17 pm »
I cut this during deer season, it had leaves like a maple but all the trees were small diameter like this one, the first one I split with a machete and a hammer and it split like a corkscrew so I cut this one on the bandsaw, gonna try and make a little horse bow with it thank's, Bub

failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline nclonghunter

  • Member
  • Posts: 1,779
Re: can you ID this wood?
« Reply #1 on: March 22, 2011, 08:43:49 pm »
My guess is Striped Maple...
There are no bad knappers, only bad flakes

Offline Dauntless

  • Member
  • Posts: 282
Re: can you ID this wood?
« Reply #2 on: March 22, 2011, 10:38:51 pm »
Mine too.
The starving grad student with too many hobbies.

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: can you ID this wood?
« Reply #3 on: March 23, 2011, 12:37:58 am »
Did it just dry like that or did you dry it bend it or let it dry in a forum?
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline avcase

  • Member
  • Posts: 485
Re: can you ID this wood?
« Reply #4 on: March 23, 2011, 04:19:06 am »
There is another Maple that goes by the common name "David's Maple" that has bark that looks similar to that.  It is a nice looking tree in the summer or winter.
-Alan

Offline bubby

  • Member
  • Posts: 11,054
Re: can you ID this wood?
« Reply #5 on: March 23, 2011, 07:18:36 am »
toomantnots, I tied down the center and put some blocks under the limbs where I wanted them and tied the ends down, figured on putting 1 or 2 layers of sinew on it an see what I can get, Bub
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline crooketarrow

  • Member
  • Posts: 2,790
Re: can you ID this wood?
« Reply #6 on: March 23, 2011, 09:53:57 am »
    Looks good I learned a long time ago and but reflex in all of my staves like that. I think it's way better than heating your reflex in. Very few people do it like this for some reason.
 Looks like striped maple to me also.
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING

Offline bubby

  • Member
  • Posts: 11,054
Re: can you ID this wood?
« Reply #7 on: March 23, 2011, 04:30:36 pm »
so if this is striped maple, is it a good bow wood like hard maple?
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,530
Re: can you ID this wood?
« Reply #8 on: March 23, 2011, 05:31:59 pm »
Stripped maple(moose wood) is pretty weak and probably not good for bows. I have heard of folks making arrows from it though.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline barebo

  • Member
  • Posts: 364
Re: can you ID this wood?
« Reply #9 on: March 23, 2011, 06:57:35 pm »
There was a guy named Val that gave me 2 staves of Striped Maple. It is physically very light , but has amazing elasticity. I made some great bows from it. Basically the same size as you've pictured here. I kept the limbs wide for most of the length and tapered the last 8" or so. What will it hurt to try - you may be surprised.

Offline bubby

  • Member
  • Posts: 11,054
Re: can you ID this wood?
« Reply #10 on: March 23, 2011, 07:02:11 pm »
barebo that's kinda what I was thinking, worst case it blows, or maybe a kids bow or blind bow, we will find out, Bub
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline bucksbuoy

  • Member
  • Posts: 116
Re: can you ID this wood?
« Reply #11 on: March 24, 2011, 01:04:57 pm »
yeah looks like moose. i cut one down too and then realized what it was. guessing your in the north east?
Its only wood

Offline bubby

  • Member
  • Posts: 11,054
Re: can you ID this wood?
« Reply #12 on: March 25, 2011, 07:23:32 am »
nope, northern california bucksbouy
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹