Author Topic: 2012 PA Bow Trade - Works In Progress  (Read 25770 times)

Keenan and 1 Guest are viewing this topic.

Offline Bevan R.

  • Member
  • Posts: 1664
2012 PA Bow Trade - Works In Progress
« on: February 01, 2012, 10:53:43 am »
You can use this thread to post pics of your bows as you work on them.

As a reminder, please send me HIGH RESOLUTION pictures to

pa_bowpics@charter.net

I would like to donate a colage of the bows from this trade for a future mag.


Bevan
Bowmakers are a little bent, but knappers are just plain flaky.

Offline ken75

  • Member
  • Posts: 1895
  • crepe myrtle is my "yella wood"
Re: 2012 PA Bow Trade - Works In Progress
« Reply #1 on: February 01, 2012, 12:06:39 pm »
im ready but i need a name first. whens the names go out

Offline Bevan R.

  • Member
  • Posts: 1664
Re: 2012 PA Bow Trade - Works In Progress
« Reply #2 on: February 01, 2012, 12:08:32 pm »
I have given the list to the selection committee. I am sure they will get them out as soon as they can.
Bowmakers are a little bent, but knappers are just plain flaky.

Offline PEARL DRUMS

  • Member
  • Posts: 2205
  • Keep on rockin' in the free world
Re: 2012 PA Bow Trade - Works In Progress
« Reply #3 on: February 01, 2012, 02:22:30 pm »
Hey Bevan do you know if its just simply a drawing? Or are certain folks assigned certain folks? Either way is fine by me.

Offline Bevan R.

  • Member
  • Posts: 1664
Re: 2012 PA Bow Trade - Works In Progress
« Reply #4 on: February 01, 2012, 02:53:38 pm »
Here is how I asked for it to be done...(and what I did as the list keeper)

I drew a name out of a hat for the maker for the overseas member. (only one).
The rest will be included in the 'north america' group until the makers for the 3 Canadian members are selected. All the rest of the names will be grouped.
I also drew a name for the recipient of a bow for a 'lower poundage bow' maker. (I grouped the members that had listed a bow range in the makers limit range and drew a name).

Other than the 2 'special' occasions/needs, the names will be handled by Calendargirl and notified by Justin S.

Is that clear?

Bevan
Bowmakers are a little bent, but knappers are just plain flaky.

Offline PEARL DRUMS

  • Member
  • Posts: 2205
  • Keep on rockin' in the free world
Re: 2012 PA Bow Trade - Works In Progress
« Reply #5 on: February 01, 2012, 02:57:12 pm »
Make sense to me, thanks

Online Keenan

  • Global Moderator
  • Member
  • Posts: 4157
Re: 2012 PA Bow Trade - Works In Progress
« Reply #6 on: February 01, 2012, 04:42:09 pm »
I usually just put everyones picture on the wall and throw a dart  :o
Don't throw away a life just because it's banged up a little.

Offline Bevan R.

  • Member
  • Posts: 1664
Re: 2012 PA Bow Trade - Works In Progress
« Reply #7 on: February 01, 2012, 04:53:19 pm »
I usually just put everyones picture on the wall and throw a dart  :o

Some pictures might 'attract' more darts than others. ::)
Bowmakers are a little bent, but knappers are just plain flaky.

Offline PEARL DRUMS

  • Member
  • Posts: 2205
  • Keep on rockin' in the free world
Re: 2012 PA Bow Trade - Works In Progress
« Reply #8 on: February 01, 2012, 04:58:47 pm »
Aint that the truth Bevan!!!! Im staying in the back and Im staying LOW............right behind J-Dub.

Offline Gun Doc

  • Member
  • Posts: 568
  • If you didn't make it, you missed the best part!
Re: 2012 PA Bow Trade - Works In Progress
« Reply #9 on: February 01, 2012, 06:41:24 pm »
Man! Last time I was this anxious ,was in the delivery room waiting for my firstborn to make her grand entrance or exit, depending on how you look at it! :) ;)  Josh
Josh Barnes  Concordia, KS       25 years hunting the yellow brick road, no cowardly lion yet
"Arrows, slugs, or shot, shot placement fills the pot."-- My Grandpa the first time he took me hunting, 1978
pn500402

Offline wildcat hunter

  • Member
  • Posts: 23
Re: 2012 PA Bow Trade - Works In Progress
« Reply #10 on: February 01, 2012, 06:53:07 pm »
 Yeh, I know, I checked 4 times in the last hour for any news. Anixous to get my name and get started!

Online fishfinder401

  • Member
  • Posts: 1278
  • noel laflamme noellaf2@cox.net
Re: 2012 PA Bow Trade - Works In Progress
« Reply #11 on: February 01, 2012, 06:58:27 pm »
i cant wait to see who i get,  making bows for my self is fun, but making them for others is even better
 ;D
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline PEARL DRUMS

  • Member
  • Posts: 2205
  • Keep on rockin' in the free world
Re: 2012 PA Bow Trade - Works In Progress
« Reply #12 on: February 01, 2012, 07:20:43 pm »
i cant wait to see who i get,  making bows for my self is fun, but making them for others is even better
 ;D

Noel gets my vote for quote of the month......hopefully he gets my name to ;)

Online fishfinder401

  • Member
  • Posts: 1278
  • noel laflamme noellaf2@cox.net
Re: 2012 PA Bow Trade - Works In Progress
« Reply #13 on: February 01, 2012, 08:13:54 pm »
thanks ;D,
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline JW_Halverson

  • Member
  • Posts: 3308
Re: 2012 PA Bow Trade - Works In Progress
« Reply #14 on: February 01, 2012, 08:15:32 pm »
Hey fish-lips, you drew my name, get to work!   >:D
Black Hills, South Dakota

No matter what happens, somebody will find a way to take it too seriously.