Thanks guys, the next one may be covered with obsidian flakes.   

  The wood is ashe, 1 inch thick, but any hardwood will work for it.  The board was 6 inches wide.  I have walnut and cherry for the next two.  As for dimensions, I hate to disappoint you.  The best I can tell you is one inch thick, and 26 inches long.  Actual measurements?  I really didn't measure anything.  I layed my old CVA muzzleloader on the board and traced around the stock.  Then changed the angle of the butt to give it a little more of a dogleg look.  I think the next one will be from an 8 inch board to get more angle on the stock.