Main Discussion Area > HowTo's and Build-a-longs

Recurve jig build-a-long

<< < (3/5) > >>

VicNova:
Next I nail it up till it is secured around the whole thing.

I do this to both sides instead of clamping the jig in place.

It seems to work well. 

VicNova:
For the final step I grab the drill and a 1" boring bit.

I drill two holes, one close to the actual curve and one further back on the jig.

These holes are made for clamps to hold the bow in place on the form.

VicNova:
 Well there's the finished jig ready to turn those longbows into recurves.


Please let me know what you thought of the build-a-along and be sure to post any questions you have.  :)

Adam:
I like it!  Thanks for posting.

osage outlaw:
You need to get a bandsaw and a vice.

Navigation

[0] Message Index

[#] Next page

[*] Previous page