« previous next »
Pages: 1 ... 23 24 [25] 26 27 ... 151

Author Topic: 2013 Bow Trade Works In Progress  (Read 570959 times)

0 Members and 3 Guests are viewing this topic.

Offline SLIMBOB

  • Member
  • Posts: 3,759
  • Deplorable Slim
Re: 2013 Bow Trade Works In Progress
« Reply #360 on: February 16, 2013, 01:22:32 pm »
If you added that yellow sports car, I,m in.
Logged
Liberty, In God We Trust, E Pluribus Unum.  Distinctly American Values.

Offline danny f

  • Member
  • Posts: 656
Re: 2013 Bow Trade Works In Progress
« Reply #361 on: February 16, 2013, 01:33:03 pm »
looks like there are a few mollys being built, i am doing one too  which will hopefully be my trade bow. this is the first one i have done so any help appreciated. how does the tilller look? it is braced half an inch from the handle and i am pulling it 40 # at 14"
Logged

Offline SLIMBOB

  • Member
  • Posts: 3,759
  • Deplorable Slim
Re: 2013 Bow Trade Works In Progress
« Reply #362 on: February 16, 2013, 01:54:10 pm »
This is the one you mentioned on the other post?  Lookin good.  Right limb needs to be brought around with the left.  Pearl mentioned something in a post the other day that I had not really given a lot of thought to prior to him bringing it up.  Get a short string on them early.  I always have as that is the way I was taught, but I had not thought about the reasons for it.  A friend came over last weekend and we worked on bows.  His goal was to make weight on his as he had come in under on his last few.  We put a string on it with 3-4 inches of brace height.  Evened the tiller up on both limbs and checked the weight...something like 40 lbs at 10 inches with an even tiller.  Hard to miss weight.  Just dial it in.  Took a little set, but most of that was gone by the time the bow was finished.
Logged
Liberty, In God We Trust, E Pluribus Unum.  Distinctly American Values.

Offline danny f

  • Member
  • Posts: 656
Re: 2013 Bow Trade Works In Progress
« Reply #363 on: February 16, 2013, 02:07:28 pm »
thanks slimbob yes its the one from the other post. i wasnt going to post pics until it was finished,  but i thought i had better get abit of advice from the pros lol. as i want the tiller to be as perfect as  i can get it. this will be my 5 th bow and i hope it will be the best for my victim lol. i will post pics of tiller as i progress.  :)
Logged

Offline Cardboard_Duck

  • Member
  • Posts: 282
  • Winter Haven, FL
Re: 2013 Bow Trade Works In Progress
« Reply #364 on: February 16, 2013, 02:14:57 pm »
Quote from: SLIMBOB on February 16, 2013, 01:22:32 pm
If you added that yellow sports car, I,m in.

Heh, I'll ask my father-in-law. You might have to pay for shipping  :o
Logged
>>>---------->

blackhawk

  • Guest
Re: 2013 Bow Trade Works In Progress
« Reply #365 on: February 16, 2013, 02:46:23 pm »
Looking good everybody......get her moving a lil more mid working limbs too Danny

I just ran a ring and cut out one out,but I don't think its what I'm looking for....ill set it to the side and go run a ring on a different stave...and see if that one screams my victims name  ;D
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: 2013 Bow Trade Works In Progress
« Reply #366 on: February 16, 2013, 03:32:04 pm »
I glued on some RM sheep horn tip overlays. Letting her dry for a few and start shaping the tips. Looking good so far, lots of bends, twist, humps and a crack or two! Very nice looker so far.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline JonW

  • Member
  • Posts: 1,906
Re: 2013 Bow Trade Works In Progress
« Reply #367 on: February 16, 2013, 04:18:50 pm »
Here's a little teaser pic.
Logged

Offline MWirwicki

  • Member
  • Posts: 2,234
  • The wood speaks to you; Listen with your eyes. GSD
Re: 2013 Bow Trade Works In Progress
« Reply #368 on: February 16, 2013, 05:29:10 pm »
OOOOOooooooh............AAAAAaaaaaah.............   ;D
Logged
Matt Wirwicki
Owosso, MI

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: 2013 Bow Trade Works In Progress
« Reply #369 on: February 16, 2013, 06:05:34 pm »
Here are some before nd after 30 minutes pics of my RM sheep horn tips. Its a nice flexible, but tough overlay.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: 2013 Bow Trade Works In Progress
« Reply #370 on: February 16, 2013, 06:10:32 pm »
Cool camo job Jon.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline beetlebailey1977

  • Member
  • Posts: 1,153
    • Bowhunters of South Carolina
Re: 2013 Bow Trade Works In Progress
« Reply #371 on: February 16, 2013, 06:38:44 pm »
Pearlie....what do you use to do your shaping on the horn?  Just files-rasps, or power tools.  If power don't you have to be careful not to over heat the horn.  I am asking because I plan to use some water buffalo horn for tips and have never tried it.  Thanks for any info.
Logged
Happy hunting to all!
Bowhunters of South Carolina Executive council member
Professional Bowhunters Society Associate member

Reevesville, SC     James V. Bailey II

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: 2013 Bow Trade Works In Progress
« Reply #372 on: February 16, 2013, 06:57:55 pm »
I dont have any power tools, just a bandsaw. Its all done with rasps and sand paper.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline MWirwicki

  • Member
  • Posts: 2,234
  • The wood speaks to you; Listen with your eyes. GSD
Re: 2013 Bow Trade Works In Progress
« Reply #373 on: February 16, 2013, 07:05:47 pm »
Good lookin' tips, Drums!
Logged
Matt Wirwicki
Owosso, MI

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: 2013 Bow Trade Works In Progress
« Reply #374 on: February 16, 2013, 07:07:25 pm »
Thanks Matt. They really start looking nice when the wood starts to darken down. They are opaque and the darker the wood the easier you can see through them! Pretty cool horn.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.
Pages: 1 ... 23 24 [25] 26 27 ... 151
« previous next »