« previous next »
Pages: [1] 2

Author Topic: Started a bendy handled HBERC- It done blowed up :(  (Read 3298 times)

0 Members and 1 Guest are viewing this topic.

Offline Cardboard_Duck

  • Member
  • Posts: 282
  • Winter Haven, FL
Started a bendy handled HBERC- It done blowed up :(
« on: April 08, 2013, 08:56:11 pm »
I glued this up over the weekend and got it floor tillered and one nock cut in today -
It's 61" TtT
1.125" at the grip
0.5" at the tip
Thickness taper of about 0.875" at the grip to 0.5625" (this is just floor tillered right now)
I'm shooting for around #45 at 28"

Back


Belly


Side Profile


Nock, I hope this is OK...  :o


Hopefully I'll get it on the tree tomorrow  >:D
« Last Edit: April 09, 2013, 07:19:53 pm by Cardboard_Duck »
Logged
>>>---------->

Offline DavidV

  • Member
  • Posts: 472
Re: Started a bendy handled HBERC
« Reply #1 on: April 08, 2013, 09:31:03 pm »
Where's the knots? :) Haha, looking good.
Logged
Springfield, MO

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Started a bendy handled HBERC
« Reply #2 on: April 08, 2013, 10:28:47 pm »
Hope that ERC holds up. Your skinny as ever. If it does, it will rip an arrow.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Cardboard_Duck

  • Member
  • Posts: 282
  • Winter Haven, FL
Re: Started a bendy handled HBERC
« Reply #3 on: April 08, 2013, 10:38:44 pm »
Quote from: PEARL DRUMS on April 08, 2013, 10:28:47 pm
Hope that ERC holds up. Your skinny as ever. If it does, it will rip an arrow.

I hope it does too... I know this is a less than ideal design, but I had a narrow cut off piece and decided to give it whirl :) I'll wear a helmet  ;D

I trapped the back of the hickory already, do you think a more rectangular or round belly would work better?
Logged
>>>---------->

Offline Badly Bent

  • Member
  • Posts: 3,750
Re: Started a bendy handled HBERC
« Reply #4 on: April 08, 2013, 10:42:16 pm »
Like that profile Duck, and the pin knock. I'd like to see how this one turns out, keep us posted.
Logged
I ain't broke but I'm badly bent.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Started a bendy handled HBERC
« Reply #5 on: April 08, 2013, 10:44:59 pm »
Flatter the better.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline lesken2011

  • Member
  • Posts: 2,063
  • Kenny
Re: Started a bendy handled HBERC
« Reply #6 on: April 08, 2013, 10:58:20 pm »
That one looks like a screamer, so far, Mr. Duck!
Logged
For by grace you have been saved through faith, and that not of yourselves; it is the gift of God, not of works, lest anyone should boast.

Ephesians 2:8-9

Kenny from Mississippi, USA

Offline bushboy

  • Member
  • Posts: 2,256
Re: Started a bendy handled HBERC
« Reply #7 on: April 09, 2013, 12:20:33 am »
Yes,I like me a light in the hand whippy little bow!4 me they shoot real straight!
Logged
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Offline autologus

  • Member
  • Posts: 1,092
Re: Started a bendy handled HBERC
« Reply #8 on: April 09, 2013, 01:31:02 am »
If you dont mind my asking where did you get your ERC boards?

Grady
Logged
Proud Hillbilly from Arkansas.

Offline Cardboard_Duck

  • Member
  • Posts: 282
  • Winter Haven, FL
Re: Started a bendy handled HBERC
« Reply #9 on: April 09, 2013, 07:46:32 am »
Thanks guys, I just hope I can make this one work.

Flat belly it is.

Grady I sent you a PM.
Logged
>>>---------->

Offline Cardboard_Duck

  • Member
  • Posts: 282
  • Winter Haven, FL
Re: Started a bendy handled HBERC
« Reply #10 on: April 09, 2013, 07:18:48 pm »
 :(

Boom...

Not even my special helper could help this bow...



I only got it to about 20" and I heard a little tick... I looked it over and couldn't see or feel a thing. I put the gizmo back on it removed some more wood, exercised it, slowly worked it back out to 20" and BOOM!!! It was already to about a 5.5" brace too... oh well, this is my first breakage, on to the next  >:D





I think this is where it started to break, there is a very small knot here. This was made with leftovers from various bows, so no real loss
Logged
>>>---------->

Offline Joec123able

  • Member
  • Posts: 1,769
Re: Started a bendy handled HBERC- It done blowed up :(
« Reply #11 on: April 09, 2013, 08:08:03 pm »
That's cedar for ya
Logged
I like osage

Offline Thesquirrelslinger

  • Member
  • Posts: 1,245
Re: Started a bendy handled HBERC- It done blowed up :(
« Reply #12 on: April 09, 2013, 08:20:52 pm »
I thought it was backed with hickory?
Logged
"Insanity is doing the same thing over and over again and expecting different results"

Offline Josh B

  • Member
  • Posts: 3,741
Re: Started a bendy handled HBERC- It done blowed up :(
« Reply #13 on: April 09, 2013, 08:43:14 pm »
You are correct slinger.  And it was the knot in the hickory that created the calamity, not the cedar.  I was rather looking forward to seeing this work out.  It sure was purty, while it lasted.  Josh
Logged

Offline Badly Bent

  • Member
  • Posts: 3,750
Re: Started a bendy handled HBERC- It done blowed up :(
« Reply #14 on: April 09, 2013, 10:21:15 pm »
Dang man I wanted to see that finished also. Say thats your first one to break? You got some catching up to do Duck, I broke two
in the last few weeks and believe me they weren't my first breaks, not even close. :D
Logged
I ain't broke but I'm badly bent.
Pages: [1] 2
« previous next »