« previous next »
Pages: [1]

Author Topic: Tiller  (Read 1695 times)

0 Members and 1 Guest are viewing this topic.

Offline Joec123able

  • Member
  • Posts: 1,769
Tiller
« on: August 17, 2013, 06:00:21 pm »
What do you guys think so far Keep in mind the handle is set back and tips recurved/reflexed

Logged
I like osage

Offline BOWMAN53

  • Member
  • Posts: 2,238
Re: Tiller
« Reply #1 on: August 17, 2013, 06:32:53 pm »
You should ask pearldrum he gives good advice.
Logged

Offline huisme

  • Member
  • Posts: 1,036
  • I'm Marc, but not that Marc.
Re: Tiller
« Reply #2 on: August 17, 2013, 06:38:20 pm »
It looks like the bow is set to a bit to the left on the tillering tree, which could cause complications. Besides that, it's hard to tell without a brace/unstrung shot to see where the bend is going on.

I put my finger over the tillering tree and handle to only compare the limbs and they appear to be pretty even considering the positioning of the tillering tree.
Logged
50#@26"
Black locust. Black locust everywhere.
Mollegabets all day long.
Might as well make them short, save some wood to keep warm.

Offline Joec123able

  • Member
  • Posts: 1,769
Re: Tiller
« Reply #3 on: August 17, 2013, 06:41:05 pm »
Quote from: huisme on August 17, 2013, 06:38:20 pm
It looks like the bow is set to a bit to the left on the tillering tree, which could cause complications. Besides that, it's hard to tell without a brace/unstrung shot to see where the bend is going on.

I put my finger over the tillering tree and handle to only compare the limbs and they appear to be pretty even considering the positioning of the tillering tree.

I did that on purpose when I draw the bow that's where most of the pressure from my hand will be so that's where I put the bow on the tiller tree
Logged
I like osage

Offline autologus

  • Member
  • Posts: 1,092
Re: Tiller
« Reply #4 on: August 17, 2013, 06:56:37 pm »
On the right limb about midlimb looks a hair flat.

Grady
Logged
Proud Hillbilly from Arkansas.

Offline Joec123able

  • Member
  • Posts: 1,769
Re: Tiller
« Reply #5 on: August 17, 2013, 07:04:10 pm »
Alright should be easier to see here

Logged
I like osage

Offline autologus

  • Member
  • Posts: 1,092
Re: Tiller
« Reply #6 on: August 17, 2013, 07:20:21 pm »
That pic looks pretty close to me.

Grady
Logged
Proud Hillbilly from Arkansas.

Offline Joec123able

  • Member
  • Posts: 1,769
Re: Tiller
« Reply #7 on: August 17, 2013, 07:23:42 pm »
Quote from: autologus on August 17, 2013, 07:20:21 pm
That pic looks pretty close to me.

Grady

I'm thinking maybe Take alittle off the left fade area ?
Logged
I like osage

Offline huisme

  • Member
  • Posts: 1,036
  • I'm Marc, but not that Marc.
Re: Tiller
« Reply #8 on: August 17, 2013, 11:45:11 pm »
Alright, now I'm thinking just a bit off the left inner fade, and a reallly little bit mid right limb. Like, five swipes with 80grit sandpaper.

Besides that it looks spot on. Gonna be beautiful  ;D
Logged
50#@26"
Black locust. Black locust everywhere.
Mollegabets all day long.
Might as well make them short, save some wood to keep warm.

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: Tiller
« Reply #9 on: August 17, 2013, 11:48:50 pm »
I think Pearly is sleeping.......................
DBar
Logged
Integrity is doing the right thing when no one is looking

Offline Joec123able

  • Member
  • Posts: 1,769
Re: Tiller
« Reply #10 on: August 17, 2013, 11:54:28 pm »
Quote from: huisme on August 17, 2013, 11:45:11 pm
Alright, now I'm thinking just a bit off the left inner fade, and a reallly little bit mid right limb. Like, five swipes with 80grit sandpaper.

Besides that it looks spot on. Gonna be beautiful  ;D

Yep I think it's good now thanks !
Logged
I like osage
Pages: [1]
« previous next »