« previous next »
Pages: [1] 2

Author Topic: Static Laminate  (Read 3881 times)

0 Members and 1 Guest are viewing this topic.

Offline adb

  • Member
  • Posts: 5,339
Static Laminate
« on: February 28, 2014, 07:23:58 pm »
Finally got this puppy in the bag. Took three tries, but third times the charmed. Here's the first full draw shots in the hand:

Vitals: 62" NTN, Hickory static recurves glued in with horizontal kerfs joints, backed with maple (over the glue joints to the base of the tips). 46#@26". 1 3/8" wide at the fades, tapering to 3/8" pin nocks. Maple, yew, ipe in the grip and risers. Staright grip (not bulbous like the first 2 failures). 1/2" of freshly unbraced set.

I'll do another complete post once it's all polished up. The new owner wants WDB SSs and a stitched leather grip.
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: Static Laminate
« Reply #1 on: February 28, 2014, 07:28:21 pm »
that is a beauty of a bend, bub
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline bow101

  • Member
  • Posts: 2,235
Re: Static Laminate
« Reply #2 on: February 28, 2014, 07:31:36 pm »
Very sweet, like those tips.   
Logged
"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline MWirwicki

  • Member
  • Posts: 2,234
  • The wood speaks to you; Listen with your eyes. GSD
Re: Static Laminate
« Reply #3 on: February 28, 2014, 07:37:03 pm »
Very nice.  I sure like the way the statics feel and shoot.
Logged
Matt Wirwicki
Owosso, MI

Offline lesken2011

  • Member
  • Posts: 2,063
  • Kenny
Re: Static Laminate
« Reply #4 on: February 28, 2014, 08:09:29 pm »
That looks like one worth the wait. Sweet bend for sure!!
Logged
For by grace you have been saved through faith, and that not of yourselves; it is the gift of God, not of works, lest anyone should boast.

Ephesians 2:8-9

Kenny from Mississippi, USA

Offline Arrowind

  • Member
  • Posts: 1,428
Re: Static Laminate
« Reply #5 on: March 01, 2014, 01:10:59 pm »
I like it!  I love the process you used for constuction.  Very cool.  The tiller is excellent!
Logged
Talking trees. What do trees have to talk about, hmm... except the consistency of squirrel droppings?

Offline Badly Bent

  • Member
  • Posts: 3,750
Re: Static Laminate
« Reply #6 on: March 01, 2014, 01:11:34 pm »
Smooooooth bend, nicely done! :)
Logged
I ain't broke but I'm badly bent.

Offline Cameroo

  • Member
  • Posts: 1,579
    • Cam's Stuff
Re: Static Laminate
« Reply #7 on: March 01, 2014, 02:16:10 pm »
That's how you do it! Nice bend on that one. 

Can you post a close up of the handle/fade area so we can see what you did differently? Thanks.
Logged

Offline bushboy

  • Member
  • Posts: 2,256
Re: Static Laminate
« Reply #8 on: March 01, 2014, 02:17:07 pm »
Cool!nice tiller!
Logged
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Telemachus

  • Guest
Re: Static Laminate
« Reply #9 on: March 01, 2014, 02:44:31 pm »
Beautiful - a work of art!
Logged

Offline dbb

  • Member
  • Posts: 745
Re: Static Laminate
« Reply #10 on: March 01, 2014, 08:43:35 pm »
If it shoots as good as it looks its a keeper for sure!
Logged
It's better to ask and look like a fool than not to ask and remain one...

Offline adb

  • Member
  • Posts: 5,339
Re: Static Laminate
« Reply #11 on: March 04, 2014, 11:52:47 am »
Quote from: Cameroo on March 01, 2014, 02:16:10 pm
That's how you do it! Nice bend on that one. 

Can you post a close up of the handle/fade area so we can see what you did differently? Thanks.

For this bow, I took the riser out into the fades. So, the first maple lam in the riser fades into where the bow is the widest on the back profile. The second bow broke right there, so I knew I had to strengthen that area. I hope you can see that in the picture.
Logged

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 31,767
  • if you have to ask you wouldn't understand ,Tenn.
Re: Static Laminate
« Reply #12 on: March 04, 2014, 12:02:37 pm »
Beautiful bow,very nice work,  :) as you say not my cup of tea but nice just the same. ;) :) :)
  Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Sasquatch

  • Member
  • Posts: 1,026
Re: Static Laminate
« Reply #13 on: March 04, 2014, 12:04:58 pm »
Great bow, show more detail. So do you think you will have any trouble with the riser popping off? What is the key to preventing that? How straight was the grain on the Ipe?  Thanks for all the answers. I really respect your works!
Logged

Offline adb

  • Member
  • Posts: 5,339
Re: Static Laminate
« Reply #14 on: March 04, 2014, 02:28:09 pm »
I just finished the bow yesterday... sanded out, finish applied, and leather grip stitched on. When it's dry, I'll take some more pics. Finish on ipe takes forever to dry, so it'll be a day or two before it's dry.

If you have enough thickness at the riser, and you tiller the bow not to bend through the handle, it won't pop off. You can't tiller out the bow and then attach the riser. It will pop off.

Because ipe grows year round, it's often difficult to determine grain orientation.  I try to avoid big knots that I can see in the wood from the beginning, but I don't worry much about small pin knots or small grain swirls.
Logged
Pages: [1] 2
« previous next »