Primitive Archer
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
Help
Search
Calendar
Login
Register
Primitive Archer
»
Main Discussion Area
»
Primitive Skills
»
Pottery
« previous
next »
Print
Pages: [
1
]
Author
Topic: Pottery (Read 4461 times)
0 Members and 1 Guest are viewing this topic.
Parnell
Member
Posts: 5,556
Pottery
«
on:
March 06, 2015, 09:17:47 am »
I'm giving pottery making a run for the first time. I've dug some really sandy clayish material from back behind the neighborhood. I'll have to get a photo of the pit I made after work and the colors. Goes from bright orange sandy dirt to a blue gray clayish material. I made a slurry and filtered it last weekend and have been letting it settle all week slowly pouring off the top water layer and it is starting to look like something that might be useable. I was speaking to someone with experience at the knap-in and they said that despite the fact of my living at the beach, there is still high quality material to be found.
We'll see what I can come up with. I'm looking forward to the firing step the most.
Here are some pictures to start, more to come this weekend.
Stephen
Logged
1’—>1’
Pappy
Global Moderator
Member
Posts: 32,116
if you have to ask you wouldn't understand ,Tenn.
Re: Pottery
«
Reply #1 on:
March 06, 2015, 09:21:06 am »
You sure that wasn't a sewer line you hit
Just kidding, love to try that some day.
Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good
Parnell
Member
Posts: 5,556
Re: Pottery
«
Reply #2 on:
March 06, 2015, 09:36:18 am »
Ha! You're not kiddin' Pap!
Logged
1’—>1’
iowabow
member
Member
Posts: 4,722
Re: Pottery
«
Reply #3 on:
March 08, 2015, 09:50:32 am »
Good luck this will be a fun thread.
Logged
(:::.) The ABO path is a new frontier to the past!
Parnell
Member
Posts: 5,556
Re: Pottery
«
Reply #4 on:
March 14, 2015, 08:40:41 pm »
Got some dry pancakes. Gonna try to filter and clean it even more.
Logged
1’—>1’
Jodocus
Member
Posts: 897
Re: Pottery
«
Reply #5 on:
March 15, 2015, 07:40:53 am »
That looks nice and usable. I'd do a couple of test pieces, just balls, about an inch or a little less. One just like that, one with some temper, one with lots of temper, and test dry and fire them.
Logged
Don't shoot!
iowabow
member
Member
Posts: 4,722
Re: Pottery
«
Reply #6 on:
March 15, 2015, 08:08:35 am »
The fastest way I found to filter was with gravity. Hydrate real well stir in a 5 gallon bucket then pour off the top slowly. The heavies fall to the bottom.
Logged
(:::.) The ABO path is a new frontier to the past!
Zuma
Member
Posts: 4,324
Re: Pottery
«
Reply #7 on:
March 30, 2015, 02:37:07 pm »
Nothing like playin in the mud.
I did some last spring and made a nice bowl.
I stored the rest in plastic containers and the clay is now all moldy.
If you have excess try to store it in plastic bags and squeeze out all the ail.
That may help. Let's see a pot
Zuma
Logged
If you are a good detective the past is at your feet. The future belongs to Faith.
mullet
Global Moderator
Member
Posts: 22,909
Eddie Parker
Re: Pottery
«
Reply #8 on:
April 02, 2015, 03:53:39 pm »
I've got a kiln
.
Logged
Lakeland, Florida
If you have to pull the trigger, is it really archery?
Parnell
Member
Posts: 5,556
Re: Pottery
«
Reply #9 on:
April 06, 2015, 10:40:34 am »
I may take you up on that Eddie. I am going to try to fire a pot outside, though.
Logged
1’—>1’
Zuma
Member
Posts: 4,324
Re: Pottery
«
Reply #10 on:
April 10, 2015, 09:22:06 pm »
My best luck was accomplished by diggin a hole (3X pot).
I started a fire in the hole with fire wood bark.
I had already let the pot dry for over a week and it was leather hard
and not wet or cold when held to my cheek.
I let the pot rest near the fire (down wind).
I fed the fire more bark and slowly moved the coals around the pot.
Then added some coals into the pot that was filled with cedar bark.
I then gently slid the pot into the hole and covered it with more bark.
Before I went to bed I piled a big pile of bark on top of the pot and hole.
Walla, around noon I slowly moved the ashes away.
About an hour later I uncovered the pot slightly and moved the pot a little more into the air. The pot was still very warm an hour later but manageable.
Main ingredient----- don't RUSH
Zuma
Logged
If you are a good detective the past is at your feet. The future belongs to Faith.
dam_01
Member
Posts: 12
Re: Pottery
«
Reply #11 on:
March 28, 2016, 01:36:26 pm »
Since there was already a pottery thread I hope you don't mind me crashing this one! I know it's old but anyhoo...
Is it strictly necessary to dry out your dug 'clay' only to slake it again to filter it?
Some stuff I've found is from a bank by a stream which looks like an old drainage ditch so it's fairly deep down already. However it's extremely solid and sticky (saturated) already.
Can you just add that to water and mash it down as it is?
Logged
Ranasp
Member
Posts: 209
Re: Pottery
«
Reply #12 on:
March 28, 2016, 02:03:35 pm »
I've seen a few different methods of making clay, one of which was to use clear medicine jars so you could see the layers of sediment and just keep pouring off the water and mixing it until all the rocks went to the bottom and the organic stuff floated off. There was a period of drying out the clay to workable consistency after that, but not to powder-dry.
Logged
dam_01
Member
Posts: 12
Re: Pottery
«
Reply #13 on:
March 28, 2016, 03:26:42 pm »
Thanks for that. I've had a look for that too now and have setup a trial jug in the kitchen now so we'll see how that works.
I guess it's all part of the fun. Lots of old ways, new ways, trial and error.
Logged
Print
Pages: [
1
]
« previous
next »
Primitive Archer
»
Main Discussion Area
»
Primitive Skills
»
Pottery